Chevrolet Compressor Mounts

Chevrolet Compressor Mounts

select a sub category
  1. 1955 - 1962 Chevy Inline Six Compressor Bracket

    1955 - 1962 Chevy Inline Six Compressor Bracket

    Part #301L
    235CI inline six cyl. Compressor bracket to sit on the left hand side of engine (driver). The bracket is designed for second generation six cylinders. The bracket will mount the alternator and compressor on the engine to use the stock pulleys. The bracket mounts a Sanden 508 / SD5H14 or a 709 / SD7H15.
    Bracket includes all mounting hardware, and belt.
    Metal finish will need to be painted Learn More
    $139.99

  2. 107R SBC Long Water Pump Low Engine Mount Pass. Side

    107R SBC Long Water Pump Low Engine Mount Pass. Side

    Part #107R
    Long water pump small block Chevy Low engine compressor mount for passenger side. The bracket mounts the compressor at the fuel pump on the block, the bracket is a full pump block off plate. It will mount a Sanden 508 / SD5H14 or a 709 / SD7H15 Compressor.
    Make sure it will clear the frame of your vehicle. Must use electric fuel pump
    All mounting hardware included
    Metal finish needs to be painted
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Learn More
    $79.99

  3. 106R SBC Short Water Pump Low Engine Mount Pass. Side

    106R SBC Short Water Pump Low Engine Mount Pass. Side

    Part #106R
    Small Block Chevy Low engine compressor mount for passenger side. The bracket mounts the compressor at the fuel pump on the block, the bracket is a full pump block off plate. It will mount a Sanden 508 / SD5H14 or a 709 / SD7H15 Compressor.
    Make sure it will clear the frame of your vehicle. Must use electric fuel pump
    All mounting hardware included
    Metal finish needs to be painted
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Learn More
    $79.99

  4. 104R BBC Short Pump Bracket High Mount Pass Side

    104R BBC Short Pump Bracket High Mount Pass Side

    Part #104R
    This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. Short water pump big block Chevy
    Bracket sits on the passenger side, includes all mounting hardware, and idler pulley
    Brackets require double groove water pump, triple groove crank and double groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted
    Alternator bracket not included
    For alternator bracket see 204L
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Learn More
    $97.49

  5. 101R SBC Long Pump Bracket High Mount Passenger Side

    101R SBC Long Pump Bracket High Mount Passenger Side

    Part #101R
    This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. Long water pump Small block Chevy
    Bracket sits on the passenger side, includes all mounting hardware
    Brackets require double groove water pump, triple groove crank and double groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket will mount a Sanden 508 / SD5H14 or a 709 / SD7H15 Compressor.
    Metal finish, needs to be painted
    Alternator bracket not included
    For alternator bracket see 201L
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Learn More
    $97.49

  6. 101L SBC Long Pump Bracket High Mount Driver Side

    101L SBC Long Pump Bracket High Mount Driver Side

    Part #101L
    This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. Long water pump Small block Chevy
    Bracket sits on the driver side, includes all mounting hardware
    Brackets require double groove water pump, triple groove crank and double groove power steering pulleys. If no p/s then double groove water and crank pulley. It will mount a Sanden 508 / SD5H14 or a 709 / SD7H15 Compressor.
    Metal finish, needs to be painted
    Alternator bracket not included
    For alternator bracket see 201R
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Learn More
    $97.49

  7. 100R SBC Short Pump Bracket High Mount Pass Side

    100R SBC Short Pump Bracket High Mount Pass Side

    Part #100R
    This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. Short water pump Small block chevy
    Bracket sits on the passenger side, includes all mounting hardware
    Brackets require double groove water pump, triple groove crank and double groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted
    Alternator bracket not included
    For alternator bracket see 200L
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Learn More
    $97.49

  8. 100L SBC Short Pump Bracket High Mount Driver Side

    100L SBC Short Pump Bracket High Mount Driver Side

    Part #100L
    This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. Short water pump Small block chevy
    Bracket will sit on the driver side, includes all mounting hardware
    Brackets require double groove water pump, triple groove crank and double groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted
    Altnerator bracket not included
    For alternator bracket see 200R
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Learn More
    $97.49

  9. Street Rod (1969 - 86 Heads) SBC Long Water Pump AC & Alternator setup (Reverse Rotation Water Pump)

    Street Rod (1969 - 86 Heads) SBC Long Water Pump AC & Alternator setup (Reverse Rotation Water Pump)

    Part #305
    Designed for the Small Block Chevy with a reverse rotation Long water pump. Bolts to the head and top water pump bolt holes. The alternator bracket will fit all 1969 and newer heads. The A.C. compressor bracket fits all G.M. aluminum heads and may be used on 1969 thru 1986 cast iron heads by drilling and tapping one hole for the upper mounting point. Will clear up to 3 3/4 in. tall valve covers when used on 1986 and earlier heads. Learn More
    $199.99

  10. Street Rod (87 and Later Heads) SBC Long Water Pump AC & Alternator setup (Reverse Rotation Water Pump)

    Street Rod (87 and Later Heads) SBC Long Water Pump AC & Alternator setup (Reverse Rotation Water Pump)

    Part #306
    Designed for the Small Block Chevy with a reverse rotation Long water pump. Bolts to the head and top water pump bolt holes. The alternator bracket will fit all 1969 and newer heads. Compressor bracket is designed to be used with 1987 and newer cast iron heads including the popular Vortec. Will clear up to 3 in. tall valve covers Learn More
    $199.99

  11. Low Profile (1969-86 Heads) SBC Long Water Pump AC & Alternator setup (Reverse Rotation Water Pump)

    Low Profile (1969-86 Heads) SBC Long Water Pump AC & Alternator setup (Reverse Rotation Water Pump)

    Part #307
    Designed for the Small Block Chevy with a reverse rotation Long water pump. For cars with low hood clearance and wide engine compartments -- trucks, 50-60's cars, even Vettes and Camaros. These brackets bolt to the head and top water pump bolt holes. The alternator bracket will fit all 1969 and newer heads. The A.C. compressor bracket fits all G.M. aluminum heads and may be used on 1969 thru 1986 cast iron heads by drilling and tapping one hole for the upper mounting point. Bracket comes complete with idler assembly. Learn More
    $314.99

  12. 108R BBC Short Pump Low Engine Mount Pass. Side

    108R BBC Short Pump Low Engine Mount Pass. Side

    Part #108R
    Short water pump big block Chevy Low engine compressor mount for passenger side. The bracket mounts the compressor at the fuel pump on the block, the bracket is a full pump block off plate. It will mount a Sanden 508 / SD5H14 or a 709 / SD7H15 Compressor.
    Make sure it will clear the frame of your vehicle. Must use electric fuel pump
    All mounting hardware included
    Metal finish needs to be painted
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Learn More
    $79.99

  13. 113L SBC Short Pump Bracket Low Profile Driver Side

    113L SBC Short Pump Bracket Low Profile Driver Side

    Part #113L
    This bracket is low profile for vehicles with little hood clearance. Short water pump Small block Chevy. Tall valve covers are ok.
    Bracket sits on the driver side, includes all mounting hardware
    Brackets require double groove water pump, triple groove crank and double groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted
    Alternator bracket not included
    For alternator bracket see 213R
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Learn More
    $97.49

  14. 113R SBC Short Pump Bracket Low Profile Pass. Side

    113R SBC Short Pump Bracket Low Profile Pass. Side

    Part #113R
    113R short pump bracket low profile driver side
    This bracket is low profile for vehicles with little hood clearance. Short water pump Small block Chevy. Tall valve covers are ok.
    Bracket sits on the passenger side, includes all mounting hardware
    Brackets require double groove water pump, triple groove crank and double groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted
    Alternator bracket not included
    For alternator bracket see 213L
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover Learn More
    $97.49

  15. 132R SBC Short Pump Bracket Low Profile Pass. Side

    132R SBC Short Pump Bracket Low Profile Pass. Side

    Part #132R
    Bracket sits on the passenger side, includes all mounting hardware
    Brackets require double groove water pump, triple groove crank and double groove power steering pulleys. If no p/s then double groove water and crank pulley. It will mount a Sanden 508 / SD5H14 or a 709 / SD7H15 Compressor.
    Metal finish, needs to be painted
    Alternator bracket not included
    For alternator bracket see 232L
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover Learn More
    $97.49

  16. 348 409 Chevy Engine Compressor Bracket

    348 409 Chevy Engine Compressor Bracket

    Part #126R
    348 409 CID Compressor bracket to sit on the right hand side of engine (passenger). The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Bracket includes all mounting hardware.
    Metal finish will need to be painted
    Alternator bracket is not included, see alternator mount Page for more information Learn More
    $97.49

  17. 123R SBC Long Pump Bracket Low Profile Pass. Side

    123R SBC Long Pump Bracket Low Profile Pass. Side

    Part #123R
    123R Long pump bracket low profile driver side. This bracket is low profile for vehicles with little hood clearance. Long water pump Small block Chevy. Tall valve covers are ok.
    Bracket sits on the passenger side, includes all mounting hardware
    Brackets require double groove water pump, triple groove crank and double groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted
    Alternator bracket not included, for alternator bracket see 223L
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Learn More
    $97.49

  18. 122R BBC Long Pump Bracket Low Profile Pass Side

    122R BBC Long Pump Bracket Low Profile Pass Side

    Part #122R
    This bracket is low profile for vehicles with little hood clearance. Short water pump Big block Chevy. Tall valve covers are ok.
    Bracket sits on the Passenger side, includes all mounting hardware
    Brackets require double groove water pump, triple groove crank and double groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted
    Alternator bracket not included, for alternator bracket see 222L
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Learn More
    $97.49

  19. 122L BBC Long Pump Bracket Low Profile Driver Side

    122L BBC Long Pump Bracket Low Profile Driver Side

    Part #122L
    This bracket is low profile for vehicles with little hood clearance. Long water pump Big block Chevy. Tall valve covers are ok.
    Bracket sits on the driver side, includes all mounting hardware
    Brackets require double groove water pump, triple groove crank and double groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Learn More
    $97.49

  20. 119L SBC Long Pump Bracket Low Profile Driver Side

    119L SBC Long Pump Bracket Low Profile Driver Side

    Part #119L
    This bracket is low profile for vehicles with little hood clearance. Long water pump Small block Chevy. Tall valve covers are ok.
    Bracket sits on the driver side, includes all mounting hardware
    Brackets require double groove water pump, triple groove crank and double groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Learn More
    $97.49

  21. 118R BBC Short Pump Bracket Low Profile Pass Side

    118R BBC Short Pump Bracket Low Profile Pass Side

    Part #118R
    This bracket is low profile for vehicles with little hood clearance. Short water pump Big block Chevy. Tall valve covers are ok.
    Bracket sits on the passenger side, includes all mounting hardware
    Brackets require double groove water pump, triple groove crank and double groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted
    Alternator bracket not included
    For alternator bracket see 218L
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Learn More
    $97.49

  22. 118L BBC Short Pump Bracket Low Profile Driver Side

    118L BBC Short Pump Bracket Low Profile Driver Side

    Part #118L
    This bracket is low profile for vehicles with little hood clearance. Short water pump Big block Chevy. Tall valve covers are ok.
    Bracket sits on the driver side, includes all mounting hardware
    Brackets require double groove water pump, triple groove crank and double groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted
    Alternator bracket not included
    For alternator bracket see 218R
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Learn More
    $97.49

  23. 116R BBC Long Pump Bracket High Mount Pass Side

    116R BBC Long Pump Bracket High Mount Pass Side

    Part #116R
    This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. Long water pump Big block Chevy
    Bracket sits on the passenger side, includes all mounting hardware
    Brackets require double groove water pump, triple groove crank and double groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted
    Alternator bracket not included, for alternator bracket see 216L.
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Learn More
    $97.49

  24. 116L BBC Long Pump Bracket High Mount Driver Side

    116L BBC Long Pump Bracket High Mount Driver Side

    Part #116L
    This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. Long water pump big block Chevy
    Bracket sits on the driver side, includes all mounting hardware, and idler pulley
    Brackets require double groove water pump, triple groove crank and double groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted.
    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Learn More
    $97.49

  25. Low Profile (87 and Later Heads) SBC Long Water Pump AC & Alternator setup (Reverse Rotation Water Pump)

    Low Profile (87 and Later Heads) SBC Long Water Pump AC & Alternator setup (Reverse Rotation Water Pump)

    Part #308
    Designed for the Small Block Chevy with a reverse rotation Long water pump. For cars with low hood clearance and wide engine compartments -- trucks, 50-60's cars, even Vettes and Camaros. These brackets bolt to the head and top water pump bolt holes. The alternator bracket will fit all 1969 and newer heads. The compressor bracket is designed to be used with 1987 and later cast iron heads including the popular Vortec. Bracket comes complete with idler assembly. Learn More
    $314.99