Big Block Mopar/Chrysler 383, 400, 413, 426, 440 Compressor Bracket
In stock
From $149.99
To $299.98
The bracket is designed to mount a Sanden SD508 / SD5H14 or a SD709 / SD7H15 compressor. The bracket will mount the compressor on the driver side of the engine between the distributor and the water-pump. The bracket includes the following: brackets, idler pulley, nuts, bolts, washers and spacers. The bracket will include everything needed to add a compressor to your engine. With or without power steering. If using idler in the kit, this bracket will need a 3-1/2" deep crank pulley or our add-On Pulley (Sold Separately). Add-on Pulley can be purchased by selecting the option for the Pulley below.
This is an exclusive NACP Bracket made in the USA in Ocala, Florida.
The bracket is designed to mount a Sanden SD508 / SD5H14 or a SD709 / SD7H15 compressor. The bracket will mount the compressor on the driver side of the engine between the distributor and the water-pump. The bracket includes the following: brackets, idler pulley, nuts, bolts, washers and spacers. The bracket will include everything needed to add a compressor to your engine. With or without power steering. If using idler in the kit, this bracket will need a 3-1/2" deep crank pulley or our add-On Pulley (Sold Separately). Add-on Pulley can be purchased by selecting the option for the Pulley below.
This is an exclusive NACP Bracket made in the USA in Ocala, Florida.
Make | Dodge |
---|---|
Model | Car |
Instructions | Big Block Mopar Bracket |