ID-260 Heat Air Defrost Indash Unit

A/C, heat, and defrost evaporator unit designed to mount behind the dash board. The evaporator has three 2.5″ oval duct hose adapters for the vents, and two 2″ defrost outlets. The controls and the vent louvers can be mounted in the dash or under the dash, or you can use your factory controls and cables. This unit is setup to use cable controls, if you need vacuum please contact us.

$490.86

SKU: ID260 Category:

A/C, heat, and defrost evaporator unit designed to mount behind the dash board. The evaporator has three 2.5″ oval duct hose adapters for the vents, and two 2″ defrost outlets. The controls and the vent louvers can be mounted in the dash or under the dash, or you can use your factory controls and cables. This unit is setup to use cable controls, if you need vacuum please contact us. We do not offer electric controls. If you want to use the factory controls we can adapter your A/C or non-A/C  control panel to use this unit. We may need you to send us your control panel, we will ship it back out to you within 48 hours. We offer a large variety of vents for these units. Please see the duct hose and vents Page for all the different options. The evaporator has a three speed blower motor with a single fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The unit is to be mounted as it is pictured. In most cars the glove box does not have to be altered. The evaporator has approximately 275 CFM and 11000 BTU A/C and 9000 BTU heat. The evaporator unit is compatible with R-134a and R-12 refrigerants.
The evaporator unit includes:

Three speed blower motor
Adjustable temperature thermostat
Evaporator unit mounting hardware
Expansion valve
Drain tube & cork tape for hose fittings
O-rings
Four rubber grommets
Eight feet of 2.5″ duct hose
Three vents of your choice.
Knob style controls with a face plate
Heater control valve w/ cable
The evaporator unit measures: 18″ wide x 8.5″ deep x 8.5″ tall. This Evaporator does not have vents for floor heat.

If you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with “select an evaporator” option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.
This evaporator unit is manufactured by Nostalgic AC Parts. in the U.S.A.

Additional information

Weight 40 lbs
Make

Model