Complete A/C kit for 1964-1967 Mustangs with a 289 or 302 CI V-8 engine. This kit is designed to fit the early Mustangs that did not have a console that went to the bottom of the dash. This Evaporator comes with your choice of Single, Dual and Tri-Vane Vents. Specify at checkout what vent style you prefer. The evaporator unit is designed to fit under the dash without interfering with the foot space of the driver or passenger. The system will work with the 289 and 302 cubic inch engine with a three bolt crank pulley. The system uses R-134a refrigerant.
The kit includes all the major components to add air to a Mustang:
• Sanden style compressor with V-belt clutch and PAG oil
• 289-302 Ford V-8 compressor bracket with mount hardware
• UD-190 underdash evaporator unit with expansion valve, controls, and mounting hardware.
• Standard O-ring drier with mounting strap
• 44-1418 superflow condenser with mounting hardware
• R-134a hose kit (see contents)
• High low pressure switch
• Directions
This is a complete A/C system that will include all the parts necessary to add A/C except the refrigerant to charge it. A radiator fan or a condenser fan may be needed depending on your current setup. The evaporator unit is manufactured by Nostalgic AC Parts in the USA. If your Mustang has a four bolt harmonic balancer we can include the correct parts, but we will need to know the year of the engine. Please specify in the comment section during checkout.
All of our complete kits come with everything needed to install Air Conditioning in your vehicle except for Pulleys (sold separately). All kits will require a 3 Groove Crank Pulley (If using V-Belts). For Chevy Small Block and Big Block Engines, you will also need a 2 Groove Water Pump Pulley (If using V-Belts).
*Parts pictured above may vary
1964 – 1967 Mustang A/C Kit 289 302 Engine
Complete A/C kit for 1964-1967 Mustangs with a 289 or 302 CI V-8 engine. This kit is designed to fit the early Mustangs that did not have a console that went to the bottom of the dash. This Evaporator comes with your choice of Single, Dual and Tri-Vane Vents. Specify at checkout what vent style you prefer. The evaporator unit is designed to fit under the dash without interfering with the foot space of the driver or passenger. The system will work with the 289 and 302 cubic inch engine with a three bolt crank pulley. If your Mustang has a four bolt harmonic balancer we can include the correct parts, but we will need to know the year of the engine. The system uses R-134a refrigerant. The kit includes all the major components to add air to a Mustang.
All of our complete kits come with everything needed to install Air Conditioning in your vehicle except for Pulleys (sold separately). All kits will require a 3 Groove Crank Pulley (If using V-Belts). For Chevy Small Block and Big Block Engines, you will also need a 2 Groove Water Pump Pulley (If using V-Belts).
Please provide us with the year and engine information in the space below.
$1,052.24 – $1,447.24
Complete A/C kit for 1964-1967 Mustangs with a 289 or 302 CI V-8 engine. This kit is designed to fit the early Mustangs that did not have a console that went to the bottom of the dash. This Evaporator comes with your choice of Single, Dual and Tri-Vane Vents. Specify at checkout what vent style you prefer. The evaporator unit is designed to fit under the dash without interfering with the foot space of the driver or passenger. The system will work with the 289 and 302 cubic inch engine with a three bolt crank pulley. The system uses R-134a refrigerant.
The kit includes all the major components to add air to a Mustang:
• Sanden style compressor with V-belt clutch and PAG oil
• 289-302 Ford V-8 compressor bracket with mount hardware
• UD-190 underdash evaporator unit with expansion valve, controls, and mounting hardware.
• Standard O-ring drier with mounting strap
• 44-1418 superflow condenser with mounting hardware
• R-134a hose kit (see contents)
• High low pressure switch
• Directions
This is a complete A/C system that will include all the parts necessary to add A/C except the refrigerant to charge it. A radiator fan or a condenser fan may be needed depending on your current setup. The evaporator unit is manufactured by Nostalgic AC Parts in the USA. If your Mustang has a four bolt harmonic balancer we can include the correct parts, but we will need to know the year of the engine. Please specify in the comment section during checkout.
All of our complete kits come with everything needed to install Air Conditioning in your vehicle except for Pulleys (sold separately). All kits will require a 3 Groove Crank Pulley (If using V-Belts). For Chevy Small Block and Big Block Engines, you will also need a 2 Groove Water Pump Pulley (If using V-Belts).
*Parts pictured above may vary
Additional information
Black Dual Vane Vents Black Face, Black Dual Vane Vents Stainless Face, Black Single Vane Vents Black Face, Black Single Vane Vents Stainless Face, Black Tri Vane Vents Black Face, Black Tri Vents Stainless Face, Chrome Dual Vane Vents Black Face (Default), Chrome Dual Vane Vents Stainless Face, Chrome Single Vane Vents Black Face, Chrome Single Vane Vents Stainless Face, Chrome Tri Vane Vents Black Face, Chrome Tri Vane Vents Stainless Face
Advertised Compressor, Chrome Compressor, Compressor not listed (Specify Compressor needed in comments. Extra charges may apply), No Compressor and No Bracket (Specify Compressor being used in comments. Extra charges may apply), OEM Sanden 508, OEM Sanden 709
Chrome Drier (Attached to Condenser), Chrome Drier with Bracket (Not Attached to Condenser), No, Yes Painted, Yes Unpainted
Ford
Car
1964-1967
Related products
1967-1972 Ford Truck F-Series A/C System
SKU: CK-6772FDToyota Landcruiser Kit No compressor bracket (BJ Diesel engine)
SKU: CK-FJ2400 $1,150.19 – $1,275.191950 – 1954 & 1958 – 1975 Indash A/C Heat System
SKU: CK-5075CC $1,194.491973 – 1979 F-Series Truck Heat A/C & Defrost
SKU: CK-7379-2FD