<p><span style=”font-size: medium;”><strong>Complete A/C system for 1974 1/2-1981 Rubber Bumper MGBs.</strong></span></p>
<p>This kit is designed to fit into any rubber bumper without altering the original appearance of the vehicle. The evaporator unit mounts under the passenger side of the glove box with additional vent outlets on the driver side, and the center indash vents. The condenser requires the radiator to be relocated to the opposite side of the core support, we include all the necessary hardware to do this. The drier is located on the driver side as the original aftermarket kits were installed, with a hose looping around the outside of the engine bay. The compressor is mounted onto the engine with our newly designed engine mount. We have spent the last two years perfecting this bracket. It is designed to bolt on the passenger side of the engine with the alternator located above the compressor. The two belts required are included with the A/C kit. This kit will work with R-12 and R-134a refrigerant.</p>
<p>This kit includes:</p>
<ul>
<li>Evaporator unit with mounting hardware</li>
<li>Expansion valve</li>
<li>Compressor Sanden Style 709 V-belt clutch assembly filled with double end capped PAG oil</li>
<li>Compressor mount bracket with hardware and belts</li>
<li>Condenser with mount brackets</li>
<li>Hose Kit with Fittings</li>
<li>Drier</li>
<li>High Low-pressure switch</li>
<li>All necessary mounting hardware</li>
<li>Directions</li>
</ul>
<p>This kit is manufactured by Nostalgic AC in the USA.</p>
<p> </p>