130R SBC Long Pump Bracket High Mount Passenger Side

This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. long water pump Small block chevy
Bracket sits on the passenger side, includes all mounting hardware.

A very versatile street rod style bracket system. Works well with most induction systems. Will clear multiple carbs, fuel injection, etc. Bolts to the head and top water pump bolt holes. The alternator bracket will fit all 1969 and newer heads. The A.C. Compressor bracket fits all G.M aluminum heads including the fast-burn aluminum heads and may be used on 1969 thru 1986 cast iron heads by drilling and tapping one hole for the upper mounting point. Will clear up to 3 in. tall center bolt valve covers when used on 1987 and later heads. Will clear up to 3 3/4 in. tall valve covers when used on 1986 and earlier heads.

Alternator bracket available via option below. Alternator Bracket Part# is 230L. Alternator Bracket is not included by default.

Brackets require double groove water pump, triple groove crank and single groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
Metal finish, needs to be painted.

A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover.

$108.00$194.00

This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. long water pump Small block chevy
Bracket sits on the passenger side, includes all mounting hardware.

A very versatile street rod style bracket system. Works well with most induction systems. Will clear multiple carbs, fuel injection, etc. Bolts to the head and top water pump bolt holes. The alternator bracket will fit all 1969 and newer heads. The A.C. Compressor bracket fits all G.M aluminum heads including the fast-burn aluminum heads and may be used on 1969 thru 1986 cast iron heads by drilling and tapping one hole for the upper mounting point. Will clear up to 3 in. tall center bolt valve covers when used on 1987 and later heads. Will clear up to 3 3/4 in. tall valve covers when used on 1986 and earlier heads.

Alternator bracket available via option above. Alternator Bracket Part# is 230L. Alternator Bracket is not included by default.

Brackets require double groove water pump, triple groove crank and single groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
Metal finish, needs to be painted.

A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover.

Additional information

Weight 7 lbs
Alternator Bracket (Options)

,

Engine Size

Instructions

Compatible with Vortec Heads

Compatible with Factory PS Bracket

Bracket Style

Pulley Type