This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. long water pump Small block chevy
Bracket sits on the passenger side, includes all mounting hardware.

This bracket system is similar to our 130R and 230L, but sits about 1 in. higher to clear valve covers up to 4 1/2 in. tall when used with 1986 or earlier heads. Bolts to the heads and water pump. When the A.C. Compressor bracket is used on heads with one bolt hole, they will require drilling and tapping one hole for the upper mounting point.

Alternator bracket available via option below. Alternator Bracket Part# is 220L. Alternator Bracket is not included by default.

Brackets require double groove water pump, triple groove crank and single groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
Metal finish, needs to be painted.

A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover.