1964 – 1966 Complete Chevy Truck A/C System

1964 – 1966 Chevy truck A/C system. Heat air and defrost system. This kit will mount on the passenger side of the firewall, it will not interfere with the glove box. The kit requires the removal of the factory heater box from inside the vehicle. The kit comes with 3 vents of your choice or you can use the vents pictured.

Kit is available with come with either cable controls (Default Option) or you have the option to send us your controls to modify. Several upgrade options are available.

Kit comes with everything pictured. Parts and price will vary depending on options picked and engine information. Kit Contents include the following:

1.) Evaporator kit with expansion valve, mounting hardware and grommets.
2.) Controls, vents, and Under-Dash panel
3.) R-134a Hose kit (See hose kits Page for contents)
4.) Black O-ring drier with drier straps
5.) 16×18 Condenser with condenser mount kit
6.) Sanden Style A/C compressor with clutch
7.) Compressor mount kit (to fit your engine)
8.) HI / Lo binary pressure switch
9.) Directions

Several upgrade options are available. Please Specify Year Model and Engine Information.

$1,052.24$1,457.24

1964 – 1966 Chevy truck A/C system. Heat air and defrost system. This kit will mount on the passenger side of the firewall, it will not interfere with the glove box. The kit requires the removal of the factory heater box from inside the vehicle. The kit comes with 3 vents of your choice or you can use the vents pictured.

Kit is available with come with either cable controls (Default Option) or you have the option to send us your controls to modify. Several upgrade options are available.

Kit comes with everything pictured. Parts and price will vary depending on options picked and engine information. Kit Contents include the following:

1.) Evaporator kit with expansion valve, mounting hardware and grommets.
2.) Controls, vents, and Under-Dash panel
3.) R-134a Hose kit (See hose kits Page for contents)
4.) Black O-ring drier with drier straps
5.) 16×18 Condenser with condenser mount kit
6.) Sanden Style A/C compressor with clutch
7.) Compressor mount kit (to fit your engine)
8.) HI / Lo binary pressure switch
9.) Directions

Several upgrade options are available. Please Specify Year Model and Engine Information.

If you need a different size condenser please specify the size in the checkout section. The compressor will come with a double V-belt clutch unless a different setup is requested. Pulleys and a radiator fan are not included. A fan and fan shroud should be used on the radiator, or a sufficient electric fan. The setup requires a double groove water pump pulley, and a triple groove crank pulley. Please specify in checkout if you have a long or short water pump and if the alternator is on the driver or passenger side. A short water pump will sit up against the timing chain cover; a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. The kit does not include the refrigerant, heater hoses, or belt. This kit is available in 12 volt only.

Additional information

Weight 70 lbs
Control Options

,

Drier Mounted Condenser

,

Compressor Options

, , , , , , ,

Chrome Drier Upgrade

,

Make

Model

Instructions

Years Covered