Complete A/C, heat and defrost system for 1950-1954 Chevy Bel Air, Fleetline, Sedan Delivery, Styleline Deluxe, Styleline Special, One-Fifty and Two-Ten Series Cars. This kit is designed to hide behind the dashboard, using vents in or under the dash.
This kit can integrate the factory cable operated controls, or you can use the rotary knob style controls that are included. If you wish to use the factory control panel please see below for more information. The kit will hook up to the factory defrost outlet under the dash. The glove box will not interfere with this system, and the firewall will not require any major modifications (Firewall will need holes for the hoses). We carry an assortment of firewall rings, and bulkheads for a clean firewall presentation.
Kit is available with come with either cable controls (Default Option) or you have the option to send us your controls to modify. Several upgrade options are available.
The kit is complete and includes the following:
- Evaporator kit with expansion valve and mounting hardware.
- Cables, and controls to use the original heater control panel
- R-134a Hose kit (See hose kits Page for contents)
- Black o-ring drier with drier straps
- 16X18 (16×20 Overall) Condenser with mounting straps
- Sanden Style A/C compressor with clutch
- Compressor mount kit (to fit your engine)
- HI / Lo binary pressure switch
- Directions
If you need a different size condenser please specify the size in the checkout section. The compressor will come with a double V-belt clutch unless a different setup is requested. Pulleys and a radiator fan are not included. A fan and fan shroud should be used on the radiator, or a sufficient electric fan. The setup requires a double groove water pump pulley, and a triple groove crank pulley. Please specify in checkout if you have a long or short water pump and if the alternator is on the driver or passenger side. A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover.
1950 – 1954 Chevy Indash A/C System with Heat
Complete A/C, heat and defrost system for 1950-1954 Chevy Bel Air, Fleetline, Sedan Delivery, Styleline Deluxe, Styleline Special, One-Fifty and Two-Ten Series Cars. This kit is designed to hide behind the dashboard, using vents in or under the dash.
This kit can integrate the factory cable operated controls, or you can use the rotary knob style controls that are included. If you wish to use the factory control panel please see below for more information. The kit will hook up to the factory defrost outlet under the dash. The glove box will not interfere with this system, and the firewall will not require any major modifications (Firewall will need holes for the hoses). We carry an assortment of firewall rings, and bulkheads for a clean firewall presentation.
Kit is available with come with either cable controls (Default Option) or you have the option to send us your controls to modify. Several upgrade options are available.
Several upgrade options are available.
The kit is complete and includes the following:
1.) In Dash Evaporator with A/C, Heat, Defrost, and Floor Heat. Expansion Valve Pre-Installed.
2.) Hardware bag with mounting hardware, Grommets and Drain Tube.
3.) Cables, and controls to use the original heater control panel.
4.) R-134a Hose kit (See hose kits Page for contents).
5.) Black O-ring drier with drier straps.
6.) 16X18 (16×20 Overall) Condenser with mounting straps.
7.) Sanden Style A/C compressor with clutch (OEM Sanden available as an upgrade).
8.) Compressor mount kit (to fit your Small Block or Big Block Chevy engine with V-Belt Pulleys).
9.) HI / Lo Binary pressure switch.
10.) Directions.
$1,052.24 – $1,502.23
Complete A/C, heat and defrost system for 1950-1954 Chevy Bel Air, Fleetline, Sedan Delivery, Styleline Deluxe, Styleline Special, One-Fifty and Two-Ten Series Cars. This kit is designed to hide behind the dashboard, using vents in or under the dash.
This kit can integrate the factory cable operated controls, or you can use the rotary knob style controls that are included. If you wish to use the factory control panel please see below for more information. The kit will hook up to the factory defrost outlet under the dash. The glove box will not interfere with this system, and the firewall will not require any major modifications (Firewall will need holes for the hoses). We carry an assortment of firewall rings, and bulkheads for a clean firewall presentation.
Kit is available with come with either cable controls (Default Option) or you have the option to send us your controls to modify. Several upgrade options are available.
The kit is complete and includes the following:
If you need a different size condenser please specify the size in the checkout section. The compressor will come with a double V-belt clutch unless a different setup is requested. Pulleys and a radiator fan are not included. A fan and fan shroud should be used on the radiator, or a sufficient electric fan. The setup requires a double groove water pump pulley, and a triple groove crank pulley. Please specify in checkout if you have a long or short water pump and if the alternator is on the driver or passenger side. A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover.
Additional information
Advertised Controls, Factory Controls (Send your controls to us)
No, Yes Painted Drivers Side, Yes Painted Passenger Side, Yes Unpainted Drivers Side, Yes Unpainted Passenger Side
Chrome Compressor (Made in China), Compressor not listed (Specify Compressor needed in comments. Extra charges may apply), No Compressor and No Bracket (Specify Compressor being used in comments. Extra charges may apply), OEM Sanden 508 (Made in Singapore), OEM Sanden 709 (Made in USA), Sanden Style 508 (Made in China), Sanden Style 709 (Made in China), Serpentine Compressor And Bracket (Extra Charges on top of upcharge may apply depending on Bracket needed)
Inline Bulkhead with Fittings, No Bulkhead, Square Bulkhead with Fittings
Chevrolet
Bel Air, Car, Fleetline, One-Fifty Series, Sedan Delivery, Styleline Deluxe, Styleline Special, Two-Ten Series
50-54 Chevy In-Dash Kit Instructions
1950, 1951, 1952, 1953, 1954
Related products
1950 – 1954 & 1958 – 1975 Indash A/C Heat System
SKU: CK-5075CC $1,194.491932-1936 Ford AC & Heat Kit Chevy Engine
SKU: CK-3236FD $1,312.11 – $1,917.11Ford Underdash AC Kit 1951 And Newer
SKU: CK-5185UFD1973 – 1979 Ford F-Series Truck A/C Only System
SKU: CK-7379-1FD