This is an aluminum parallel flow condenser with an o-ring drier mounted and connected with a 5/16″ aluminum tube. The condenser has mounting holes across the top, bottom, and on each end. The condenser and drier are black in color. The drier has a sight glass, and a standard switch port. The setup will arrive assembled.

1. Core size: (Determined by Options Below)
2. Overall condenser size: (Determined by Options Below)
3. Condenser Thickness: 7/8″ (3 1/2″ at Drier)
4. The condenser has two male o-ring fittings:
5. Top: #8 Male insert (3/4″-16)
6. Bottom: #6 Male insert (5/8″-18)

The condenser can be used with R-12 or R-134a refrigerants.

Core Size and Overall Size are determined by the choices below.

AVAILABILITY OF CONDENSER REQUESTED IS DETERMINED BY LOCAL INVENTORY NUMBERS. CONDENSER SIZE MAY OR MAY NOT BE AVAILABLE. YOU WILL BE CALLED IF CONDENSER IS NOT AVAILABLE IN REQUESTED SIZE.

Please specify what side you want the Drier mounted. If you do not specify it will arrive with the Drier on the Passenger Side.

The condenser can be installed with the fittings exiting on the passenger or driver side.