Corvette LS Engine Compressor Bracket

Corvette LS Engine Compressor Bracket

Truck / SUV LS Engine Compressor Bracket

Truck / SUV LS Engine Compressor Bracket

Camaro Firebird GTO LS Engine Compressor Bracket

Availability: In stock
Part Number
999-2431
$247.00

Camaro, Firebird, GTO, F-body LS engine compressor bracket conversion kit. This kit will not work on 2010-2012 Camaro engines. The bracket will move the compressor from down low to the top of the passenger side of the engine. By moving the compressor you will have better clearance and hose access. This bracket setup is designed with the car builder in mind. The stock compressor might interfere with the frame, this bracket eliminates any fabrication that might be required. The mount plates are made of T6 6061 aluminum which is lightweight and solid. The plates are cut out with on a computer controlled, ultra high pressure water jet. All the prototypes were tested for stress and vibrations with finite element analysis. The tensioner is placed in its proper position between the a/c compressor and the crankshaft pulley in the slack portion of the belt. Belt and tensioner geometry is optimized for proper belt tension equivalent to the OEM requirements. All pulleys are aligned with each other within SAE specifications.
The bracket kit includes the following:

  • Water pump brace
  • Spacers
  • Idler pulley mount
  • All mounting hardware coated with zinc to fight off corrosion and rust
  • Tensioner

This bracket kit is made in the USA. The kit requires a Sanden style compressor 508 or 709 with a serpentine clutch and a six rib serpentine belt.
The pictures are provided by Kwik Performance.

$247.00

Camaro, Firebird, GTO, F-body LS engine compressor bracket conversion kit. This kit will not work on 2010-2012 Camaro engines. The bracket will move the compressor from down low to the top of the passenger side of the engine. By moving the compressor you will have better clearance and hose access. This bracket setup is designed with the car builder in mind. The stock compressor might interfere with the frame, this bracket eliminates any fabrication that might be required. The mount plates are made of T6 6061 aluminum which is lightweight and solid. The plates are cut out with on a computer controlled, ultra high pressure water jet. All the prototypes were tested for stress and vibrations with finite element analysis. The tensioner is placed in its proper position between the a/c compressor and the crankshaft pulley in the slack portion of the belt. Belt and tensioner geometry is optimized for proper belt tension equivalent to the OEM requirements. All pulleys are aligned with each other within SAE specifications.
The bracket kit includes the following:

  • Water pump brace
  • Spacers
  • Idler pulley mount
  • All mounting hardware coated with zinc to fight off corrosion and rust
  • Tensioner

This bracket kit is made in the USA. The kit requires a Sanden style compressor 508 or 709 with a serpentine clutch and a six rib serpentine belt.
The pictures are provided by Kwik Performance.

More Information
Pulley Type Serpentine
Bracket Style Low Profile
Engine Size LS Series
Compatible with Vortec Heads N/A
Compatible with Factory PS Bracket Yes
Instructions 999-2431 Instructions
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account