1950-1954 Chevy Indash Heat and A/C System

1950 - 1954 Chevy Indash A/C System with Heat

Complete Firewall Forward Kit Ford Cars and Trucks - Select an Evaporator

Complete Firewall Forward Kit Ford Cars and Trucks - Select an Evaporator

1949 & Older Chevy Indash A/C System with Heat

Availability: In stock
Part Number
CK-4931CC
$1,252.24

Complete A/C Heat and Defrost system for 1949 and older Chevy Cars, Street Rods and Hot Rods with Chevy V-8's. This kit will fit all Chevy vehicles including the Fleetline, Fleetmaster, Master, Master Deluxe, Special Deluxe, Styleline, and Stylemaster series during this period. This is a 12 volt kit, we do not carry any six volt A/C systems. This kit is designed to hide behind the dashboard, using vents that go in or under the dash. This kit can integrate the factory cable operated controls, or you can use the rotary knob style controls that are included.  If you wish to use the factory control panel please see below for more information.  The kit will hook up to the factory defrost outlet under the dash.  The glove box will not interfere with this system, and the firewall will not require any major modifications (Firewall will need holes for the hoses).  We carry an assortment of firewall rings, and bulkheads for a clean firewall presentation.

The kit is complete and includes the following (Kit contents can vary depending on options picked)

1.)   In Dash Evaporator with A/C, Heat, Defrost, and Floor Heat.
2.)   Hardware bag with Expansion valve, mounting hardware, grommets and drain tube.
3.)   Duct hose and louvers if needed
4.)   Controls to use the original control panel, or knob controls if needed
5.)   R-134a Hose kit (See hose kits Page for contents)Black O-ring drier with drier straps
6.)   Vertical street rod condenser with condenser mount kit
7.)   Sanden Style A/C compressor with clutch (OEM Sanden or Chrome Compressor upgrade available)
8.)   SBC / BBC Compressor mount kit (to fit your Small Block or Big Block Chevy engine with V-Belt Pulleys)
9.)   HI / Lo Binary pressure switch
10.) Heater control valve
11.) Directions

Complete A/C heat and Defrost system for 1949 and older Chevy Cars, Street Rods and Hot Rods with Chevy V-8's. This kit will fit all Chevy vehicles including the Fleetline, Fleetmaster, Master, Master Deluxe, Special Deluxe, Styleline, and Stylemaster series during this period. This is a 12 volt kit, we do not carry any six volt A/C systems. This kit is designed to hide behind the dashboard, using vents that go in or under the dash. This kit can integrate the factory cable operated controls, or you can use the rotary knob style controls that are included.  If you wish to use the factory control panel please see below for more information.  The kit will hook up to the factory defrost outlet under the dash.  The glove box will not interfere with this system, and the firewall will not require any major modifications (Firewall will need holes for the hoses).  We carry an assortment of firewall rings, and bulkheads for a clean firewall presentation.

The kit is complete and includes the following (Kit contents can vary depending on options picked)

1.)   In Dash Evaporator with A/C, Heat, Defrost, and Floor Heat.
2.)   Hardware bag with Expansion valve, mounting hardware, grommets and drain tube.

3.)   Duct hose and louvers if needed
4.)   Controls to use the original control panel, or knob controls if needed
5.)   R-134a Hose kit (See hose kits Page for contents)Black O-ring drier with drier straps
6.)   Vertical street rod condenser with condenser mount kit
7.)   Sanden Style A/C compressor with clutch (OEM Sanden or Chrome Compressor upgrade available)

8.)   SBC / BBC Compressor mount kit (to fit your Small Block or Big Block Chevy engine with V-Belt Pulleys)
9.)   HI / Lo Binary pressure switch
10.) Heater control valve
11.) Directions

The compressor will come with a double V-belt clutch unless a different setup is requested. Pulleys and a radiator fan are not included. A fan and fan shroud should be used on the radiator, or a sufficient electric fan. The setup requires a double groove water pump pulley, and a triple groove crank pulley. Please specify in checkout if you have a long or short water pump and if the alternator is on the driver or passenger side. A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Heater hose, belt, and refrigerant are not included

More Information
Years Covered 1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949
Make Chevrolet
Model Car, Fleetline, Sedan Delivery, Styleline Deluxe, Styleline Special
Instructions 49 & Older Chevy In-Dash Kit Instructions
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account