1955 - 1956 Chevrolet Complete A/C Heat System

1955 - 1956 Chevrolet A/C System with Heat

1958 - 1959 Complete Chevy Truck A/C System

1958 - 1959 Complete Chevy Truck A/C System

1955 - 1957 (Later Model 55) Complete Chevy Truck A/C System

Availability: In stock
Part Number
CK-5557CHPU
$997.49

1955 - 1957 Chevy truck A/C system, later model 1955 trucks. Heat air and defrost system. This kit will mount on the passenger side of the firewall, it will not interfere with the glove box. The kit requires the removal of the factory heater box from inside the vehicle. The kit has vent pods period correct for the 1955-1957 Tri 5 model Chevy Pickups.

Kit is available with come with either cable controls (Default Option) or you have the option to send us your controls to modify. Several upgrade options are available.

1955 - 1957 Chevy truck A/C system, later model 1955 trucks. Heat air and defrost system. This kit will mount on the passenger side of the firewall, it will not interfere with the glove box. The kit requires the removal of the factory heater box from inside the vehicle. The kit has vent pods period correct for the 1955-1957 Tri 5 model Chevy Pickups.

Kit is available with come with either cable controls (Default Option) or you have the option to send us your controls to modify. Several upgrade options are available.

The kit is complete and includes the following (Kit contents can vary depending on options picked):

  • Evaporator kit with expansion valve and mounting hardware, grommets.
  • Controls, vents, and Under-Dash panel
  • R-134a Hose kit (See hose kits Page for contents)
  • Black O-ring drier with drier straps
  • 14 x 24 Condenser with condenser mount kit
  • Sanden Style A/C compressor with clutch
  • Compressor mount kit (to fit your engine)
  • HI / Lo binary pressure switch
  • Directions

If you need a different size condenser please specify the size in the checkout section. The compressor will come with a double V-belt clutch unless a different setup is requested. Pulleys and a radiator fan are not included. A fan and fan shroud should be used on the radiator, or a sufficient electric fan. The setup requires a double groove water pump pulley, and a triple groove crank pulley. Please specify in checkout if you have a long or short water pump and if the alternator is on the driver or passenger side. A short water pump will sit up against the timing chain cover; a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. The kit does not include the refrigerant, heater hoses, or belt. This kit is available in 12 volt only.

More Information
Years Covered 1955-1957
Make Chevrolet
Model Pickup
Instructions 55-57 Chevy Pickup Kit Instructions
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account