1967 - 1972 Chevy Truck A/C Heat Defrost System

1967 - 1972 Chevy Truck A/C Heat Defrost System

1980 - 1987 C-series Chevy Pickup Truck A/C Kit

1980 - 1987 C/K-series Chevy Pickup Truck A/C Kit

1967 - 1972 Chevy Truck Underdash A/C System

Availability: In stock
Part Number
CK-6772-1CHPU
$1,252.24

1967 - 1972 Chevy truck A/C system. Underdash mount A/C system. The evaporator unit will mount under the dash of the truck, and span from the passenger side to the steering column. The evaporator unit will require a small modification to the factory heater box, but it will not affect the performance of the heater system. The evaporator unit has four vents with chrome outlines, and a simple knob control.

Kit comes with everything pictured. Parts and price will vary depending on options picked and engine information. Kit Contents include the following:

1.) AC Only 15,000 BTU Evaporator with expansion valve, mounting hardware and grommets.
2.) R-134a Hose kit (See hose kits Page for contents)
3.) Black O-ring drier with drier straps
4.) 14 x 25 Condenser with condenser mount kit
5.) Sanden Style A/C compressor with clutch
6.) Compressor mount kit (to fit your Chevy engine)
7.) HI / Lo binary pressure switch
8.) Directions

Several upgrade options are available. Please Specify Year Model and Engine Information.

1967 - 1972 Chevy truck A/C system. Underdash mount A/C system. The evaporator unit will mount under the dash of the truck, and span from the passenger side to the steering column. The evaporator unit will require a small modification to the factory heater box, but it will not affect the performance of the heater system. The evaporator unit has four vents with chrome outlines, and a simple knob control.

Kit comes with everything pictured. Parts and price will vary depending on options picked and engine information. Kit Contents include the following:

1.) AC Only 15,000 BTU Evaporator with expansion valve, mounting hardware and grommets.
2.) R-134a Hose kit (See hose kits Page for contents)
3.) Black O-ring drier with drier straps
4.) 14 x 25 Condenser with condenser mount kit
5.) Sanden Style A/C compressor with clutch
6.) Compressor mount kit (to fit your Chevy engine)
7.) HI / Lo binary pressure switch
8.) Directions

Several upgrade options are available. Please Specify Year Model and Engine Information.

If you need a different size condenser please specify the size in the checkout section. The compressor will come with a double V-belt clutch unless a different setup is requested. Pulleys and a radiator fan are not included. A fan and fan shroud should be used on the radiator, or a sufficient electric fan. The setup requires a double groove water pump pulley, and a triple groove crank pulley. Please specify in checkout if you have a long or short water pump and if the alternator is on the driver or passenger side. A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. The kit does not include the refrigerant, heater hoses, or belt.

More Information
Years Covered 1967-1972
Make Chevrolet
Model Pickup
Instructions 67-72 Chevy Pickup Instructions
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account