British A/C Complete Kits

British A/C Complete Kits

  1. Blower Switch Knob  

    Blower Switch Knob

    Part #1011
    Rotary switch control knob. The knob has a chrome Ring with a chrome fan blade. This knob is commonly used on rotary blower fan switches. The knob is made of a plastic and rubber for easy grip adjustments.
    For all universal rotary fan blower switch Learn More
    $3.99

  2. Rotary Thermostat Knob  

    Rotary Thermostat Knob

    Part #1012
    Rotary switch control knob. The knob has a chrome Ring with a chrome snowflake. This knob is commonly used on rotary thermostats. The knob is made of a plastic and rubber for easy grip adjustments.
    For all universal rotary thermostats. Learn More
    $3.99

  3. Binary High Low Safety Switch Male Threads  

    Binary High Low Safety Switch Male Threads

    Part #119-9900
    Binary high low pressure safety switch
    Shuts the system down if the low side drops or if the high rises too high. This switch protects the compressor if a problem occurs. The switch is male with 3/8" thread size that thread into our driers, and two male spade connectors.
    High Cut in 23KG / high cut out 31.4KG
    Low cut in 2.0KG / Low cut out 1.5KG Learn More
    $9.99

  4. Rotary Blower Fan Switch  

    Rotary Blower Fan Switch

    Part #119-9908
    Five wire rotary blower fan switch. The rotary blower switch is the most common switch on aftermarket a A/C systems with rotary controls. The switch is also used on some round or oval billet control panels. This is a three speed, four position blower switch. The switch is designed to run the blower motor at low, medium, and high speeds, as well as turn the compressor on (through the thermostat).
    This switch is good up to 20 amps. Our 12 volt blower motors do not draw more then 16.8 amps. Learn More
    $9.99

  5. MGB Binary Switch with Plug  

    MGB Binary Switch with Plug

    Part #119-9915
    Binary safety switch and plug.
    Binary switches are used to protect your compressor.
    They shut the system down if the low side pressure drops too low, or if the high side pressure rises to high. Learn More
    $15.99

  6. Rotary Thermostat 42" Probe  

    Rotary Thermostat 42" Probe

    Part #119-9922-42

    Rotary thermostat with a 42 inch capillary tube.

    Learn More
    $24.99

  7. Flare Expansion Valve  

    Flare Expansion Valve

    Part #14-9875

    Standard flare thermostatic expansion valve. This is the most common flare expansion valve used on aftermarket and original applications. The male fittings sizes are:
    3/4"-16 male flare thread; connects to the evaporator
    5/8"-18 male flare thread; connects to the liquid line which runs to the condenser
    This valve is compatible with R-12 and R-134a refrigerants.

    Learn More
    $19.99

  8. York to Sanden Compressor Adapter Plate / Universal Mount  

    York to Sanden Compressor Adapter Plate / Universal Mount

    Part #2400

    This plate is used to adapt the original Ford York / Techumseh compressor bracket to a new style Sanden compressor. The plate will mount a Sanden SD5H14 / 508, 510, and SD7H15 / 709 series compressors.
    The plate also makes a great starting point for fabricating a custom bracket. The plate is made in the USA, and it has a powder coated finish (not painted).

    Some modification of the existing York Bracket may be necessary. Existing York Bracket must have a Tensioner and Idler Pulley.

    Learn More
    $39.99

  9. Universal Black O-ring Drier with Drier Strap  

    Universal Black O-ring Drier with Drier Strap

    Part #4-1000

    3/8" male O-ring drier 2.5" x 8" Black drier Great replacement for all aftermarket A/C systems. The Drier has a sight glass for use with R-12 refrigerant and two switch ports.

    This drier will have a drier strap included. If you are replacing an existing receiver drier and do not wish to have another drier strap, choose the option below to not include it.

    The drier can be used with all refrigerants

    Learn More

    As low as: $14.99

  10. Chrome Receiver Drier with Polished Bracket  

    Chrome Receiver Drier with Polished Bracket

    Part #4-1004

    Chrome O-ring receiver drier with a polished aluminum mounting bracket. The drier has 3/8" male O-ring fittings, 5/8"-18 Threads, and two female switch ports on opposite sides of the drier.
    The drier measures 2-1/2" x 8" tall, and has a sight glass on the top for R-12 systems.
    The drier can be used with all refrigerants.
    Below is an explanation of the driers operation, and why they should be changed.
    The drier is used on many A/C systems. It receives refrigerant from the condenser. The drier is mounted either adjacent to the condenser or somewhere in line before the expansion valve. It consists of a tank, a filter, a drying (agent) desiccant, a pick up tube, and a sight glass (on some applications), the drier has several functions.
    First the drier acts as storage tank. It receives the liquid refrigerant from the condenser and holds this liquid until the evaporator requires it. Requirements vary according to operations conditions.
    Second the drier acts as a protection agent for the system. The portion of the drier that contains the desiccant absorbs moisture from the refrigerant. The desiccant is usually in the form of silica gel. It is important that the moisture be removed from the system, as it can be extremely harmful to the air conditioning system components and to the systems operation.
    The sight glass is not used with R-134a, it was used on vehicles made before 1994 that used R-12 freon.

    Learn More
    $59.99