Nostalgic AC - Keeping your classics cool

Complete firewall forward kit without an evaporator unit. This product is here for our customers to purchase a complete kit without a pre-selected evaporator unit. Please choose an Evaporator below that you would like to use with this kit; or you can use an existing evaporator system. Use the options below to custom make this firewall forward kit or click add to cart to order the items as pictured. (Our representatives will call you to ensure you get the correct components you need for your system)

1947-1955 (early model 1955) Chevy Truck Complete A/C system. The evaporator unit mounts onto the hood hinge mount with our special designed bracket. This kit will mount on the passenger side of the firewall, it will not interfere with the glove box. The kit requires the removal of the factory heater box from inside the vehicle. The kit has an Under-Dash vent panel that runs from the passenger side to the center of the dash, then has another vent on the driver side of the cab.

The kit is complete and includes the following (Kit contents can vary depending on options picked):

1.)   In Dash Evaporator with A/C, Heat, Defrost, and Floor Heat. Expansion Valve Pre-Installed
2.)   Hardware bag with mounting hardware, Grommets and Drain Tube.
3.)   Under-Dash panel with built in Vents and Control Pod that fits contour of dash.
4.)   R-134a Hose kit (See hose kits Page for contents).
5.)   Black O-ring drier with drier straps.
6.)   14 x 18 Condenser with condenser mount kit.
7.)   Sanden Style A/C compressor with clutch (OEM Sanden available as an upgrade).
8.)   Compressor mount kit (to fit your Small Block or Big Block Chevy engine with V-Belt Pulleys).
9.)   HI / Lo Binary pressure switch.
10.) Directions.

Kit is available with either cable controls (Default Option) or electric controls. Several upgrade options are available.

Complete A/C Heat and Defrost system for 1949 and older Chevy Cars, Street Rods and Hot Rods with Chevy V-8's. This kit will fit all Chevy vehicles including the Fleetline, Fleetmaster, Master, Master Deluxe, Special Deluxe, Styleline, and Stylemaster series during this period. This is a 12 volt kit, we do not carry any six volt A/C systems. This kit is designed to hide behind the dashboard, using vents that go in or under the dash. This kit can integrate the factory cable operated controls, or you can use the rotary knob style controls that are included.  If you wish to use the factory control panel please see below for more information.  The kit will hook up to the factory defrost outlet under the dash.  The glove box will not interfere with this system, and the firewall will not require any major modifications (Firewall will need holes for the hoses).  We carry an assortment of firewall rings, and bulkheads for a clean firewall presentation.

The kit is complete and includes the following (Kit contents can vary depending on options picked)

1.)   In Dash Evaporator with A/C, Heat, Defrost, and Floor Heat.
2.)   Hardware bag with Expansion valve, mounting hardware, grommets and drain tube.
3.)   Duct hose and louvers if needed
4.)   Controls to use the original control panel, or knob controls if needed
5.)   R-134a Hose kit (See hose kits Page for contents)Black O-ring drier with drier straps
6.)   Vertical street rod condenser with condenser mount kit
7.)   Sanden Style A/C compressor with clutch (OEM Sanden or Chrome Compressor upgrade available)
8.)   SBC / BBC Compressor mount kit (to fit your Small Block or Big Block Chevy engine with V-Belt Pulleys)
9.)   HI / Lo Binary pressure switch
10.) Heater control valve
11.) Directions

Kit is available with either cable controls (Default Option) or electric controls. Several upgrade options are available

Complete A/C, heat and defrost system for 1950-1954 Chevy Bel Air, Fleetline, Sedan Delivery, Styleline Deluxe, Styleline Special, One-Fifty and Two-Ten Series Cars. This kit is designed to hide behind the dashboard, using vents in or under the dash.

This kit can integrate the factory cable operated controls, or you can use the rotary knob style controls that are included.  If you wish to use the factory control panel please see below for more information.  The kit will hook up to the factory defrost outlet under the dash.  The glove box will not interfere with this system, and the firewall will not require any major modifications (Firewall will need holes for the hoses).  We carry an assortment of firewall rings, and bulkheads for a clean firewall presentation.

Several upgrade options are available.

The kit is complete and includes the following:
1.)   In Dash Evaporator with A/C, Heat, Defrost, and Floor Heat. Expansion Valve Pre-Installed.
2.)   Hardware bag with mounting hardware, Grommets and Drain Tube.
3.)   Cables, and controls to use the original heater control panel.
4.)   R-134a Hose kit (See hose kits Page for contents).
5.)   Black O-ring drier with drier straps.
6.)   16X18 (16x20 Overall) Condenser with mounting straps.
7.)   Sanden Style A/C compressor with clutch (OEM Sanden available as an upgrade).
8.)   Compressor mount kit (to fit your Small Block or Big Block Chevy engine with V-Belt Pulleys).
9.)   HI / Lo Binary pressure switch.
10.) Directions.

Complete A/C heat and defrost kit for 1955-1956 Chevy Cars. This kit is designed to add heat air and defrost to a Chevy without modifying or altering the interior. The system is designed to fit on the passenger side of the firewall with the hoses exiting through the passenger side firewall. The kit is designed to use the factory defrost Y that is already in the vehicle, this will eliminate fighting with aftermarket adapters. The kit will work with the factory heater cable operated controls. The system will not interfere with the glove box, or the passenger side floor board.

The glove box will not interfere with this system, and the firewall will not require any major modifications (Firewall will need holes for the hoses).  We carry an assortment of firewall rings, and bulkheads for a clean firewall presentation.

Kit is available with either cable controls (Default Option) or electric controls. Several upgrade options are available.

1955 - 1957 Chevy truck A/C system, later model 1955 trucks. Heat air and defrost system. This kit will mount on the passenger side of the firewall, it will not interfere with the glove box. The kit requires the removal of the factory heater box from inside the vehicle. The kit has vent pods period correct for the 1955-1957 Tri 5 model Chevy Pickups. Several upgrade options are available.

1957 Chevy Complete A/C heat and defrost kit for Chevy Bel Air, Del Ray, Nomad, One-Fifty Series, Sedan Delivery, and Two-Ten Series. This kit is designed to add heat air and defrost without modifying or altering the interior. The system is designed to fit on the passenger side of the firewall with the hoses exiting through the passenger side firewall. The kit is designed to use the factory defrost Y that is already in the vehicle, this will eliminate fighting with aftermarket adapters. The kit will work with the factory heater cable operated controls.

The glove box will not interfere with this system, and the firewall will not require any major modifications (Firewall will need holes for the hoses).  We carry an assortment of firewall rings, and bulkheads for a clean firewall presentation.

Several upgrade options are available.

1958 - 1959 Chevy truck A/C system. Heat air and defrost system. This kit will mount on the passenger side of the firewall, it will not interfere with the glove box. The kit requires the removal of the factory heater box from inside the vehicle. The kit comes with 3 vents of your choice or you can use the vents pictured. Several upgrade options are available.

1958-1975 Chevy Car Complete A/C System for all 58-75 Chevy models including: Bel Air, Biscayne, Brookwood, Camaro, Caprice, Chevelle, Delray, El Camino, Chevy II Nova, Impala, Kingswood, Laguna, Malibu, Monte Carlo, Monza, Nomad, Parkwood, Sedan Delivery, Townsman, Vega and Yeoman. This kit is designed to hide behind the dashboard, using vents in or under the dash. This kit can integrate the factory cable operated controls, or you can use the rotary knob style controls that are included.  If you wish to use the factory control panel please choose option below (There will be a return shipping charge if Controls are converted after Complete Kit has been sent).

Full Kit contents include all major components shown in the picture. Full kit details can be seen in the product description.

Several upgrade options are available. Full Kit contents are listed in the product description.