PreviousNext

1967-1969 Chevrolet Camaro Complete A/C Kit

1967-1969 Chevrolet Camaro Complete A/C Kit

More Views

Availability: In stock

Be the first to review this product

Part #CK-6769CAM
$949.99

Complete AC Kit for the 1967-1969 Camaro. The kit is designed to use the factory A/C and non-A/C control panel. The kit will work with original vents, or we provide new vents. This kit will mount on the passenger side of the firewall, it will not interfere with the glove box. The condenser is designed to mount into the stock bolt holes in the radiator core support. The condenser will have the drier mounted on the passenger side. The kit requires the removal of the factory heater core from inside the vehicle.


The glove box will not interfere with this system, and the firewall will not require any major modifications (Firewall will need holes for the hoses).  We carry an assortment of firewall rings, and bulkheads for a clean firewall presentation.


Kit is available with either cable controls (Default Option) or electric controls. Several upgrade options are available.


Cable Controlled Evaporator will not have a built in floor heat option. If you wish to have floor heat, it is available with our electric control option.

$949.99

Details

Complete AC Kit for the 1967-1969 Camaro. The kit is designed to use the factory A/C and non-A/C control panel. The kit will work with original vents, or we provide new vents. This kit will mount on the passenger side of the firewall, it will not interfere with the glove box. The condenser is designed to mount into the stock bolt holes in the radiator core support. The condenser will have the drier mounted on the passenger side. The kit requires the removal of the factory heater core from inside the vehicle.

The glove box will not interfere with this system, and the firewall will not require any major modifications (Firewall will need holes for the hoses).  We carry an assortment of firewall rings, and bulkheads for a clean firewall presentation.

Kit is available with either cable controls (Default Option) or electric controls. Several upgrade options are available.

Cable Controlled Evaporator will not have a built in floor heat option. If you wish to have floor heat, it is available with our electric control option.

The kit is complete and includes the following:

  • Evaporator kit with expansion valve and mounting hardware, grommets.
  • Controls to use the original heater control panel
  • R-134a Hose kit (See hose kits Page for contents)
  • Black O-ring drier with drier straps
  • 14x25 Condenser with condenser mount kit
  • Sanden Style A/C compressor with clutch
  • Compressor mount kit (to fit your engine)
  • HI / Lo binary pressure switch
  • Defrost adapter
  • Directions

The compressor will come with a double V-belt clutch unless a different setup is requested. Pulleys and a radiator fan are not included. A fan and fan shroud should be used on the radiator, or a sufficient electric fan. The setup requires a double groove water pump pulley, and a triple groove crank pulley. Please specify in checkout if you have a long or short water pump and if the alternator is on the driver or passenger side. A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. The kit does not include the refrigerant, heater hoses, or belt. If you are running the compressor on the driver side and would like the condenser fittings to exit on the driver side please specify this in the comment section during checkout.

Additional Information

Year Range 1967-1969
Make Chevrolet
Model Camaro
Instructions 67-69 Camaro In-Dash Kit Instructions

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

Only registered users can write reviews. Please, log in or register