Ford Indash AC Heat Defrost Kit 1950 and Older

Ford Indash AC Heat Defrost Kit 1950 and Older

Complete Firewall Forward Kit Ford Cars and Trucks - Select an Evaporator

Complete Firewall Forward Kit Ford Cars and Trucks - Select an Evaporator

1932-1936 Ford AC & Heat Kit Chevy Engine

Availability: In stock
Part Number
CK-3236FD
$986.99

Complete heat air and defrost In-Dash kit that fits into the early fords without interfering with the dashboard, or passenger foot area. The evaporator unit will hide behind the dash with very little of the unit showing. The system uses three vent louvers that can be installed under the dashboard, or cut into the dash.

Several upgrade options are available for this kit using the options below.

Please specify your engine below if you have a different engine that is not a Small Block or Big Block Chevy with a V-Belt Setup.

Complete heat air and defrost In-Dash kit that fits into the early fords without interfering with the dashboard, or passenger foot area. The evaporator unit will hide behind the dash with very little of the unit showing. The system uses three vent louvers that can be installed under the dashboard, or cut into the dash. See our vents to choose which style you prefer. The kit includes a condenser that will sit vertically in front of the radiator, and a compressor bracket that sits high on the engine to avoid interfering with the fenders. The system is designed to work with R-134a refrigerant.

The kit includes:

  1. ID-260 heat air and defrost evaporator (19" wide x 7-1/2" deep x 9" tall).
  2. Sanden style compressor with clutch assembly and oil
  3. 19" tall x 12" wide Superflow condenser with mounting brackets
  4. Cables, and controls to use the original heater control panel
  5. Standard O-ring drier with mounting strap
  6. High low pressure switch
  7. Compressor bracket (to fit your specific engine setup)
  8. R-134a hose kit with fittings (see kit contents)
  9. Three dash vents, and duct hose (your choice of vents)
  10. Expansion valve, heater control valve
  11. All mounting hardware
  12. Directions

This kit is designed to fit a small block Chevy engine. The kit has the option of defrost, if you do not want the defrost option please let us know in the comment section during checkout. Please let us know your vent choice in the comment section at checkout.
The Compressor will come with a double V-belt clutch unless a different setup is requested. Pulleys and a radiator fan are not included. A fan and fan shroud should be used on the radiator, or a sufficient electric fan. The setup requires a double groove water pump pulley, and a triple groove crank pulley. Please specify in checkout if you have a long or short water pump and if the alternator is on the driver or passenger side. A short water pump will sit up against the timing chain cover; a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Heater hose, belt, and refrigerant are not included.

More Information
Years Covered 1932-1936
Make Ford
Model Car, Pickup
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account