49-52 Ford Truck

  1. 1949 - 1952 Ford Truck Heat Air Defrost  

    1949 - 1952 Ford Truck Heat Air Defrost

    Part #CK-4952FD

    Complete heat air and defrost system for 1949-1952 Ford Trucks. The system is designed to fit under the dash without interfering with the glove box or passenger's leg room. The inside system includes five vent outlets, and two outlets for defrost. The vent setup will put four vents to the right (passenger side) of the steering column and one vent on the left side of the column.The controls are contained in the panel that mounts under the dash board. The system will not require any cutting to the vehicle other than to the firewall which will need four holes (1-1/4" Diameter) for the heater and A/C hoses, and a 3/4" drain tube hole. The system comes with four grommets to allow the hoses to pass through the firewall without getting damaged. This kit can be used with a Ford or Chevy Engine. If you would like to know if you we have a setup for your Ford please contact us or see the mount kits Page for Fords.

    *Parts pictured above may vary.

    Several upgrade options are available.

    Bracket kit will come with a new 3 Groove Crank Pulley or Add-On Pulley. If you don't want the Pulley, choose the option below to not include it. Removal of Pulley from kit will subtract $100 from kit price.

    Please provide us with the year, model and engine information in the space below.

    Learn More
    $1,149.99

  2. Ford Truck Indash Heat & A/C Defrost System  

    Ford Truck Indash Heat & A/C Defrost System

    Part #CK-3772FD

    Universal Ford truck heat air and defrost system. This system is designed to fit into the truck where the stock heater box normally mounts, the heater box has to be removed. The system will fit against the firewall behind the glove box, the glove box will not have to be altered on most trucks. The vents can be cut into the dash, or can be hung under the dash, this is your choice. The kit can use the factory heater controls, if you do not have the factory controls we can include rotary knob controls.

    Several upgrade options are available.

    Bracket kit will come with a new 3 Groove Crank Pulley or Add-On Pulley. If you don't want the Pulley, choose the option below to not include it. Removal of Pulley from kit will subtract $100 from kit price.

    Please provide us with the year, model and engine information in the space below.

    Learn More
    $1,149.99