1964 - 1967 Mustang A/C Kit 170 - 200 Ci Six Cylinder

1964 - 1967 Mustang A/C Kit 170 - 200 Ci Six Cylinder

Ford Underdash AC Kit 1951 And Newer

Ford Underdash AC Kit 1951 And Newer

1963 - 1967 Ford Falcon Underdash AC Kit

Availability: In stock
Part Number
CK-6367-3
$1,252.24

Complete a/c kit for a Ford Falcon with a six cylinder or a V-8 engine. The evaporator unit is designed to fit under the dash without interfering with the foot space of the driver or passenger. We will include the correct bracket for your engine, select from the drop down menu above. If your Falcon has a six cylinder motor it will not require any extra pulleys. The compressor mount bracket will require an alternator. The compressor mounts on the lower passenger side of the engine. The compressor will have a double groove clutch pulley. One pulley on the clutch will run on the stock pulleys on the engine. The second compressor pulley will route around the alternator, this setup eliminates any needs for more pulleys. If you have a 289 engine the Compressor bracket will mount on top of the engine, driver side. The 289 bracket will fit 1964-1966 289 CID engines, if you have an early model V-8 the bracket will need some modifications to fit. The system uses R-134a refrigerant.

All of our complete kits come with everything needed to install Air Conditioning in your vehicle except for Pulleys (sold separately). All kits will require a 3 Groove Crank Pulley (If using V-Belts). For Chevy Small Block and Big Block Engines, you will also need a 2 Groove Water Pump Pulley (If using V-Belts).

Please provide us with the year and engine information in the space below.

Complete a/c kit for a Ford Falcon with a six cylinder or a V-8 engine. The evaporator unit is designed to fit under the dash without interferring with the foot space of the driver or passenger. We will include the correct bracket for your engine, select from the drop down menu above. If your Falcon has a six cylinder motor it will not require any extra pulleys. The compressor mount bracket will require an alternator. The compressor mounts on the lower passenger side of the engine. The compressor will have a double groove clutch pulley. One pulley on the clutch will run on the stock pulleys on the engine. The second compressor pulley will route around the alternator, this setup eliminates any needs for more pulleys. If you have a 289 engine the comrpessor bracket will mount on top of the engine, driver side. The 289 bracket will fit 1964-1966 289 CID engines, if you have an early model V-8 the bracket will need some modifications to fit. The system uses R-134a refrigerant.
The kit includes all the major components to add air to a Falcon:

  • Sanden style compressor with V-belt clutch and PAG oil
  • 289-302 Ford V-8 or 170/200 V-6 compressor bracket with mount hardware
  • UD-190 underdash evaporator unit with expansion valve, controls, and mounting hardware.
  • Standard O-ring drier with mounting strap
  • 44-1418 superflow condenser with mounting hardware
  • R-134a hose kit (see contents)
  • High low pressure switch
  • Directions
 
This is a complete a/c system that will include all the parts necessary to add a/c except the refrigerant to charge it. A radiator fan or a condenser fan may be needed depending on your current setup. The evaporator unit is manufactured by Nostalgic Air Parts, Inc. in the USA.

All of our complete kits come with everything needed to install Air Conditioning in your vehicle except for Pulleys (sold separately). All kits will require a 3 Groove Crank Pulley (If using V-Belts). For Chevy Small Block and Big Block Engines, you will also need a 2 Groove Water Pump Pulley (If using V-Belts).


*Parts pictured above may vary

More Information
Years Covered 1964-1967
Make Ford
Model Car
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account