Ford Truck Underdash A/C System

Ford Truck Underdash A/C System

1932-1936 Ford AC & Heat Kit Chevy Engine

1932-1936 Ford AC & Heat Kit Chevy Engine

Ford Indash AC Heat Defrost Kit 1950 and Older

Availability: In stock
Part Number
CK-3750IFD
$1,512.11

Complete universal A/C heat and defrost system for 1950 and older Ford Cars. This kit is designed to hide behind the dashboard, using vents in or under the dash. This kit can integrate the factory cable operated controls, or you can use the rotary knob style controls that are included, or upgrade to our billet control panel. If you wish to use the factory control panel please see below for more information. The kit will hook up to the factory defrost outlet under the dash, it will also hook into factory vents if your vehicle has them. If you do not have vents, we can include aftermarket vents. The glove box will not interfere with this system, and the firewall will not require any major modification (Firewall will need holes for the hoses).

Please provide engine size, year, and if the engine is from a car or truck in the comments section of checkout. If we do not have a bracket for your engine we will contact you prior to shipping any parts. If you would like to know if you we have a setup for your Ford please contact us or see the mount kits Page for Fords.

*Parts pictured above may vary.

Several upgrade options are available.

All of our complete kits come with everything needed to install Air Conditioning in your vehicle except for Pulleys (sold separately). All kits will require a 3 Groove Crank Pulley (If using V-Belts). For Chevy Small Block and Big Block Engines, you will also need a 2 Groove Water Pump Pulley (If using V-Belts).

Complete universal A/C heat and defrost system for 1950 and older Ford Cars. This kit is designed to hide behind the dashboard, using vents in or under the dash. This kit can integrate the factory cable operated controls, or you can use the rotary knob style controls that are included, or upgrade to our billet control panel. If you wish to use the factory control panel please see below for more information. The kit will hook up to the factory defrost outlet under the dash, it will also hook into factory vents if your vehicle has them. If you do not have vents, we can include aftermarket vents. The glove box will not interfere with this system, and the firewall will not require any major modification (Firewall will need holes for the hoses). The kit includes grommets to run the hoses through the firewall. If you are interested in a bulkhead see our variety in the hose kit and fittings section of the site.
Using your factory controls is not a problem, even if the vehicle was heat only. You can send us your control panel to be integrated into our A/C kit. We can adapt any original panel and have it shipped back to you in 48 hours. The control panel will be rewired for our system, the only wiring required with this setup is an ignition, ground, and binary / compressor switch. All the leads will be ready for you to hook up. This kit will work on most cars 1950 and older.
The kit includes:

  • Evaporator kit with expansion valve and mounting hardware, four grommets.
  • Duct hose and louvers
  • Controls to use the original control panel, or knob controls
  • R-134a Hose kit (See hose kits Page for contents)
  • Black O-ring drier with drier straps
  • Condenser with condenser mount kit
  • Sanden Style A/C compressor with clutch
  • Compressor mount kit (to fit your engine)
  • HI / Lo binary pressure switch
  • Heater control valve
  • Directions

This is a complete A/C system that will include all the parts necessary to add A/C except the refrigerant to charge it. A radiator fan or a condenser fan may be needed depending on your current setup. The evaporator unit is manufactured by Nostalgic AC Parts in the USA. The aluminum billet controls use vacuum from the engine.
Please provide engine size, year, and if the engine is from a car or truck in the comments section of checkout. If we do not have a bracket for your engine we will contact you prior to shipping any parts. If you would like to know if you we have a setup for your Ford please contact us or see the mount kits Page for Fords. If you have a Chevrolet engine please visit the kits for Chevrolet cars. The major difference in the kit is the engine bracket. We will make sure the kit fits your Ford with the Chevy engine.

*Parts in picture may vary from order.

All of our complete kits come with everything needed to install Air Conditioning in your vehicle except for Pulleys (sold separately). All kits will require a 3 Groove Crank Pulley (If using V-Belts). For Chevy Small Block and Big Block Engines, you will also need a 2 Groove Water Pump Pulley (If using V-Belts).

More Information
Years Covered 1931-1950
Make Ford
Model Car, Pickup
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account