A/C Hose Crimper for Standard Barrier A/C Hose

R-134a hose kit to hook up a complete system. Kit includes R-134a charging ports, straight and 90 degree fittings, O-rings, and hose. All fittings are beadlock fittings with sleeves. This hose kit will work on any aftermarket A/C system with o-ring connections. If you have older parts that have flare fittings we sell flare adapters to adapt this hose kit to any old system.

The following parts are included:

1. #6 Fittings (4 Total)
• Qty 2 Straight
• Qty 2 90 Degree
2. #8 Fittings (3 Total)
• Qty 1 Straight
• Qty 1 90 Degree
• Qty 1 90 Degree with R-134a Charge Port
3. #10 Fittings (3 Total)
• Qty 1 Straight
• Qty 1 90 Degree
• Qty 1 90 Degree with R-134a Charge Port
4. #6 Hose 6 Ft
5. #8 Hose 4 Ft
6. #10 Hose 5 Ft
7. O-ring Kit (With assorted #6, #8, #10 O-rings)

Hoses and fittings are not crimped together.

This is a universal R-134a hose kit that can be used on any aftermarket A/C system. The kit includes o-ring fittings that will match up to all the components used on aftermarket air conditioning systems. This is a very popular replacement kit, it includes the popular components to repair an A/C system. A breakdown of the kit is below:
# 6 5/16" Barrier A/C hose six feet
# 8 13/32" Barrier A/C hose four feet
# 10 1/2" Barrier A/C hose five feet
4-1001 Shorty o-ring drier with drier bracket
High low pressure switch
Four single hole grommets for # 6 to #10 hose
1/8 bottle of oil for the o-rings, and fitting connections
One foot of insulation cork tape
Three # 6 straight o-ring fittings
One # 8 straight o-ring fitting
One # 10 straight o-ring fitting
Two # 6 90 degree o-ring fittings
One # 8 90 degree o-ring fitting
One # 10 90 degree o-ring fittings
One # 8 135 degree fitting with R-134a high charge port
One # 10 135 degree fitting with R-134a low charge port
5- # 6, 3- # 8, & 3- # 10 O-rings
This kit will give you all the necessary parts to change the hoses with plenty of fitting configurations for your own hose routing. The kit includes Grommets to keep the hoses from getting cut while going through metal, as well as cork tape to wrap the fittings and expansion valve. The drier is designed to use the high low switch port that is included, which can all be mounted easily with the drier bracket.