PreviousNext

1974 1/2-1981 MGB Rubber Bumper Complete A/C Kit

1974 1/2-1981 Rubber Bumper Complete A/C Kit

More Views

Availability: In stock

Be the first to review this product

Part #CK-2102
$1,099.99

Complete A/C system for 1974 1/2-1981 Rubber Bumper MGBs. 


This kit includes the following:


1.) Evaporator unit with duct hose, vents and mounting hardware.
2.) Hardware bag with Grommets, Expansion Valve and Drain Tube.
3.) Sanden Style A/C Compressor with clutch.
4.) Compressor mount bracket with hardware, and belts.
5.) Condenser with mount brackets.
6.) R-134a Hose kit (See hose kits Page for contents).
7.) Black O-ring drier with drier straps.
8.) HI / Lo Binary pressure switch.
9.) Directions.

$1,099.99

Details

Complete A/C system for 1974 1/2-1981 Rubber Bumper MGBs.

This kit is designed to fit into any rubber bumper without altering the original appearance of the vehicle. The evaporator unit mounts under the passenger side of the glove box with additional vent outlets on the driver side, and the center indash vents. The condenser requires the radiator to be relocated to the opposite side of the core support, we include all the necessary hardware to do this. The drier is located on the driver side as the original aftermarket kits were installed, with a hose looping around the outside of the engine bay. The compressor is mounted onto the engine with our newly designed engine mount. We have spent the last two years perfecting this bracket. It is designed to bolt on the passenger side of the engine with the alternator located above the compressor. The two belts required are included with the A/C kit. This kit will work with R-12 and R-134a refrigerant.

This kit includes the following:

1.) Evaporator unit with duct hose, vents and mounting hardware.
2.) Hardware bag with Grommets, Expansion Valve and Drain Tube.
3.) Sanden Style A/C Compressor with clutch.
4.) Compressor mount bracket with hardware, and belts.
5.) Condenser with mount brackets.
6.) R-134a Hose kit (See hose kits Page for contents).
7.) Black O-ring drier with drier straps.
8.) HI / Lo Binary pressure switch.
9.) Directions.

This kit is manufactured by Nostalgic AC in the USA.

Additional Information

Years Covered 1974 1/2-1981
Make No
Model No
Instructions No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

Only registered users can write reviews. Please, log in or register