Mount Kits & Pulleys

There are hundreds of mount kits available for all cars. If you want polished or Chrome serpentine setups click on the March performance link. Please select the categories below to find your particular application.
All brackets use a 7176, 508, or 709 series compressor, unless noted different. We carry a full line of pulleys as well. If you need a mount or pulley that is not listed please Contact Us.

We carry the highest quality pulleys and brackets available!

Nostalgic AC is built on a reputation of having the lowest prices for the best products.  We are not a company that is in the business of making a car look good with chrome or polished products.  "Keeping Your Classics Cool" that is our motto, for this reason we do not have a large selection of pretty brackets.  We only sell what will get the job done on any quality street rod.  We have a very good ally in the street rod world; this ally is Alan Grove Components.  In our opinion the guys at Alan Grove have figured it out.  They make a high quality bracket for a low price.  

The compressor, alternator, and power steering brackets for some Fords, and all Chevy's are manufactured by Alan Grove in the USA, the other brackets we carry are manufactured in Texas.  All the brackets and pulleys we sell are made in the USA and are the best quality available.  We do not specialize in brackets for cars we only sell what our distributors can supply us.  We do carry a very large selection of brackets for compressors but our alternator and power steering assortment is limited to Chevrolet engines. 

Most of our Ford and Chrysler brackets include the belt and necessary pulley to run the a/c compressor, all of our brackets will include the bolt hardware and directions.  If you have an engine in your vehicle that is not listed on our website please contact us for availabililty, we have access to hundreds.

If you have a less popular engine a bracket might have to be fabricated from one of our universal compressor mounts.  We cannot fabricate the bracket for you without having the engine in our shop.  If you need a power steering or alternator bracket that is not listed we will not be much help, we only sell what is on the website.

The GM and Ford engine pulleys we sell are all OE quality pulleys.  The GM pulleys are made by General Motors, they are not generic replicas.  The Ford Pulleys are made by a Foundry in the USA.  These pulleys will be true when they are installed, and will perform just as they are intended to do.  We do stock many different idler pulleys and eccentrics but we do not list them on the website.  Idler pulleys are a great way to tension a belt that is going to be used with a fabricated a/c compressor bracket.  If you would like any information about fabricating a bracket please call or email our technical team.

  1. 100L SBC Short Pump Bracket High Mount Driver Side  

    100L SBC Short Pump Bracket High Mount Driver Side

    Part #100L

    This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. Short water pump Small block chevy
    Bracket sits on the drivers side, includes all mounting hardware
    Brackets require double groove water pump, triple groove crank and single groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted
    Alternator bracket available via option below. Alternator Bracket Part# is 200R. Alternator Bracket is not included by default.

    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover.

    Learn More
    $97.49

  2. 100R SBC Short Pump Bracket High Mount Passenger Side  

    100R SBC Short Pump Bracket High Mount Passenger Side

    Part #100R

    This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. Short water pump Small block chevy
    Bracket sits on the passenger side, includes all mounting hardware
    Brackets require double groove water pump, triple groove crank and single groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted
    Alternator bracket available via option below. Alternator Bracket Part# is 200L. Alternator Bracket is not included by default.

    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover.

    Learn More
    $97.49

  3. 101L SBC Long Pump Bracket High Mount Driver Side  

    101L SBC Long Pump Bracket High Mount Driver Side

    Part #101L

    This bracket will sit above the intake manifold for vehicles with plenty of hood clearance.  Same as 101R and 201L, but for opposite sides. The A.C. bracket is often used in conjunction with the factory alternator mount. Long water pump Small block chevy
    Bracket sits on the drivers side, includes all mounting hardware.

    With the increasing use of long water pumps on modified vehicles, these are very popular. Bolts to the top water pump and the two front intake bolts. May be used individually or as a pair. Will clear tall valve covers. NO DRILLING OR TAPPING REQUIRED. A hole is provided in the A.C. bracket for a heater hose. Will Not Work With Vortec Heads.

    Alternator bracket available via option below. Alternator Bracket Part# is 201R. Alternator Bracket is not included by default.

    Brackets require double groove water pump, triple groove crank and single groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted.

    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover.

    Learn More
    $97.49

  4. 101R SBC Long Pump Bracket High Mount Passenger Side  

    101R SBC Long Pump Bracket High Mount Passenger Side

    Part #101R

    This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. Long water pump Small block chevy
    Bracket sits on the passenger side, includes all mounting hardware.

    With the increasing use of long water pumps on modified vehicles, these are very popular. Bolts to the top water pump and the two front intake bolts. May be used individually or as a pair. Will clear tall valve covers. NO DRILLING OR TAPPING REQUIRED. A hole is provided in the A.C. bracket for a heater hose. Will Not Work With Vortec Heads.

    Alternator bracket available via option below. Alternator Bracket Part# is 201L. Alternator Bracket is not included by default.

    Brackets require double groove water pump, triple groove crank and single groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted.

    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover.

    Learn More
    $97.49

  5. 102R SBC Short Pump Bracket High Mount Passenger Side  

    102R SBC Short Pump Bracket High Mount Passenger Side

    Part #102R

     Designed for use in applications that require added clearance for Tri-Power Carbs, Dual-Quad Carbs, etc. Bolt to top water pump and the two front intake bolts. Alternator bracket works well with intake mounted oil filler tube. Will clear tall valve covers. Will Not Work With Vortec Heads

    This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. Short water pump Small block chevy
    Bracket sits on the passenger side, includes all mounting hardware
    Brackets require double groove water pump, triple groove crank and single groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted
    Alternator bracket available via option below. Alternator Bracket Part# is 202L. Alternator Bracket is not included by default.

    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover.

    Learn More
    $99.50

  6. 103R SBC Long Pump Bracket High Mount Passenger Side  

    103R SBC Long Pump Bracket High Mount Passenger Side

    Part #103R

    This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. Long water pump Small block chevy
    Bracket sits on the passenger side, includes all mounting hardware.

    Similar to the 101R and 201L, these brackets move the compressor forward and the alternator out to clear multiple carbs, etc. The compressor belt runs in the groove normally used by the alternator and vice versa.Will Not Work With Vortec Heads

    Alternator bracket available via option below. Alternator Bracket Part# is 203L. Alternator Bracket is not included by default.

    Brackets require double groove water pump, triple groove crank and single groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted.

    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover.

    Learn More
    $97.49

  7. 104R BBC Short Pump Bracket High Mount Passenger Side  

    104R BBC Short Pump Bracket High Mount Passenger Side

    Part #104R

    This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. Short water pump Big block chevy
    Bracket sits on the passenger side, includes all mounting hardware.

    A very strong bracket system for Big Blocks.  Bolts to the heads and top water pump locations.  A.C. bracket is complete with idler assembly.  Will clear most valve covers.

    Brackets require double groove water pump, triple groove crank and single groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
    Metal finish, needs to be painted

    Alternator bracket available via option below. Alternator Bracket Part# is 204L. Alternator Bracket is not included by default.

    A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover.

    Learn More
    $97.49

  8. Universal Ford Compressor Mount Driver Side  

    Universal Ford Compressor Mount Driver Side

    Part #105L

    Bracket will fit all SBF engines. Mounts on the driver side of engine. Make sure you have sufficient hood clearance (will work on Mustangs). The bracket can be adjusted to move forward and backward for belt alignment. The bracket is designed to mount a Sanden SD508 / SD5H14 or a SD709 / SD7H15 compressor. All mounting hardware included to add a compressor to your small block Ford Engine.
    Metal finish, needs to be painted
    Picture courtesy of Alan Grove components

    Learn More
    $99.49

  9. Universal Ford Compressor Bracket Passenger Side  

    Universal Ford Compressor Bracket Passenger Side

    Part #105R
    Bracket will fit all SBF engines. Mounts on the passenger side of engine. Make sure you have sufficient hood clearance (will work on Mustangs). The bracket can be adjusted to move forward and backward for belt alignment. The bracket is designed to mount a Sanden SD508 / SD5H14 or a SD709 / SD7H15 compressor. All mounting hardware included to add a compressor to your small block Ford Engine.
    Metal finish, needs to be painted
    Picture courtesy of Alan Grove components Learn More
    $99.49

  10. 106R SBC Short Water Pump Low Engine Mount Pass. Side  

    106R SBC Short Water Pump Low Engine Mount Pass. Side

    Part #106R

    Tight-fit design fits narrow frames. Compressor bolts to fuel pump mounting flange for strength. May be driven off crank and fan pulleys OR crank pulley ONLY. REQUIRES USE OF A REMOTE FUEL PUMP. Check our dimension requirements before ordering.

    Learn More
    $79.99