14 X 18 Remote Condenser W/ Fan & Aluminum Shroud

14 X 18 Remote Condenser W/ Fan & Aluminum Shroud

14 x 25 Remote Condenser W/ Fan & Aluminum Shroud

Availability: In stock
Part Number
44-1425RC
$360.35
Remote Condenser for street rods, classics, and other aftermarket setups. This is the largest Remote condenser we offer. The superflow condenser is our standard 44-1425 with an aluminum shroud and two 12" electric fans with curved blades. The Shroud and fans are mounted to the condenser with stainless steel screws for longevity and durability. The setup will work with R-12 and R-134a refrigerants. The condenser cannot be mounted completely flat, it has to be on a slight angle so the small fitting #6 is lower than the large fitting #8.
Condenser core size: 14" x 25"
Overall condenser size: 14-1/2" tall x 27" wide
Overall thickness: 3-1/8"
Fan CFM (per fan): 950 CFM
Total CFM: 1900 CFM (both fans mounted on condenser w/ shroud)
Amps: (per fan) 8.0 amp draw
Total amps: (16.0 amp draw (both fans mounted on condenser w/ shroud)
This type of remote condenser should not be used in front of the radiator. The shroud will block airlfow from passing through the radiator causing condensing and / or overheating problems. This is a design we came up after doing numerous early model street rods. If you have a condensing issue and do not have any room in front of the radiator this is the perfect setup.
$360.35

Remote Condenser for street rods, classics, and other aftermarket setups. This is the largest Remote condenser we offer. The superflow condenser is our standard 44-1425 with an aluminum shroud and two 12" electric fans with curved blades. The Shroud and fans are mounted to the condenser with stainless steel screws for longevity and durability. The setup will work with R-12 and R-134a refrigerants. The condenser cannot be mounted completely flat, it has to be on a slight angle so the small fitting #6 is lower than the large fitting #8.
Condenser core size: 14" x 25"
Overall condenser size: 14-1/2" tall x 27" wide
Overall thickness: 3-1/8"
Fan CFM (per fan): 950 CFM
Total CFM: 1900 CFM (both fans mounted on condenser w/ shroud)
Amps: (per fan) 8.0 amp draw
Total amps: (16.0 amp draw (both fans mounted on condenser w/ shroud)
This type of remote condenser should not be used in front of the radiator. The shroud will block airlfow from passing through the radiator causing condensing and / or overheating problems. This is a design we came up after doing numerous early model street rods. If you have a condensing issue and do not have any room in front of the radiator this is the perfect setup.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
We found other products you might like!