Complete A/C heat and Defrost system for 1949 and older Chevy Cars, Street Rods and Hot Rods with Chevy V-8’s. This kit will fit all Chevy vehicles including the Fleetline, Fleetmaster, Master, Master Deluxe, Special Deluxe, Styleline, and Stylemaster series during this period. This is a 12 volt kit, we do not carry any six volt A/C systems. This kit is designed to hide behind the dashboard, using vents that go in or under the dash. This kit can integrate the factory cable operated controls, or you can use the rotary knob style controls that are included. If you wish to use the factory control panel please see below for more information. The kit will hook up to the factory defrost outlet under the dash. The glove box will not interfere with this system, and the firewall will not require any major modifications (Firewall will need holes for the hoses). We carry an assortment of firewall rings, and bulkheads for a clean firewall presentation.
The kit is complete and includes the following (Kit contents can vary depending on options picked)
1.) In Dash Evaporator with A/C, Heat, Defrost, and Floor Heat.
2.) Hardware bag with Expansion valve, mounting hardware, grommets and drain tube.
3.) Duct hose and louvers if needed
4.) Controls to use the original control panel, or knob controls if needed
5.) R-134a Hose kit (See hose kits Page for contents)Black O-ring drier with drier straps
6.) Vertical street rod condenser with condenser mount kit
7.) Sanden Style A/C compressor with clutch (OEM Sanden or Chrome Compressor upgrade available)
8.) SBC / BBC Compressor mount kit (to fit your Small Block or Big Block Chevy engine with V-Belt Pulleys)
9.) HI / Lo Binary pressure switch
10.) Heater control valve
11.) Directions
The compressor will come with a double V-belt clutch unless a different setup is requested. Pulleys and a radiator fan are not included. A fan and fan shroud should be used on the radiator, or a sufficient electric fan. The setup requires a double groove water pump pulley, and a triple groove crank pulley. Please specify in checkout if you have a long or short water pump and if the alternator is on the driver or passenger side. A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Heater hose, belt, and refrigerant are not included
1949 & Older Chevy Indash A/C System with Heat
Complete A/C Heat and Defrost system for 1949 and older Chevy Cars, Street Rods and Hot Rods with Chevy V-8’s. This kit will fit all Chevy vehicles including the Fleetline, Fleetmaster, Master, Master Deluxe, Special Deluxe, Styleline, and Stylemaster series during this period. This is a 12 volt kit, we do not carry any six volt A/C systems. This kit is designed to hide behind the dashboard, using vents that go in or under the dash. This kit can integrate the factory cable operated controls, or you can use the rotary knob style controls that are included. If you wish to use the factory control panel please see below for more information. The kit will hook up to the factory defrost outlet under the dash. The glove box will not interfere with this system, and the firewall will not require any major modifications (Firewall will need holes for the hoses). We carry an assortment of firewall rings, and bulkheads for a clean firewall presentation.
The kit is complete and includes the following (Kit contents can vary depending on options picked)
1.) In Dash Evaporator with A/C, Heat, Defrost, and Floor Heat.
2.) Hardware bag with Expansion valve, mounting hardware, grommets and drain tube.
3.) Duct hose and louvers if needed
4.) Controls to use the original control panel, or knob controls if needed
5.) R-134a Hose kit (See hose kits Page for contents)Black O-ring drier with drier straps
6.) Vertical street rod condenser with condenser mount kit
7.) Sanden Style A/C compressor with clutch (OEM Sanden or Chrome Compressor upgrade available)
8.) SBC / BBC Compressor mount kit (to fit your Small Block or Big Block Chevy engine with V-Belt Pulleys)
9.) HI / Lo Binary pressure switch
10.) Heater control valve
11.) Directions
$1,052.24 – $1,352.24
Complete A/C heat and Defrost system for 1949 and older Chevy Cars, Street Rods and Hot Rods with Chevy V-8’s. This kit will fit all Chevy vehicles including the Fleetline, Fleetmaster, Master, Master Deluxe, Special Deluxe, Styleline, and Stylemaster series during this period. This is a 12 volt kit, we do not carry any six volt A/C systems. This kit is designed to hide behind the dashboard, using vents that go in or under the dash. This kit can integrate the factory cable operated controls, or you can use the rotary knob style controls that are included. If you wish to use the factory control panel please see below for more information. The kit will hook up to the factory defrost outlet under the dash. The glove box will not interfere with this system, and the firewall will not require any major modifications (Firewall will need holes for the hoses). We carry an assortment of firewall rings, and bulkheads for a clean firewall presentation.
The kit is complete and includes the following (Kit contents can vary depending on options picked)
1.) In Dash Evaporator with A/C, Heat, Defrost, and Floor Heat.
2.) Hardware bag with Expansion valve, mounting hardware, grommets and drain tube.
3.) Duct hose and louvers if needed
4.) Controls to use the original control panel, or knob controls if needed
5.) R-134a Hose kit (See hose kits Page for contents)Black O-ring drier with drier straps
6.) Vertical street rod condenser with condenser mount kit
7.) Sanden Style A/C compressor with clutch (OEM Sanden or Chrome Compressor upgrade available)
8.) SBC / BBC Compressor mount kit (to fit your Small Block or Big Block Chevy engine with V-Belt Pulleys)
9.) HI / Lo Binary pressure switch
10.) Heater control valve
11.) Directions
The compressor will come with a double V-belt clutch unless a different setup is requested. Pulleys and a radiator fan are not included. A fan and fan shroud should be used on the radiator, or a sufficient electric fan. The setup requires a double groove water pump pulley, and a triple groove crank pulley. Please specify in checkout if you have a long or short water pump and if the alternator is on the driver or passenger side. A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. Heater hose, belt, and refrigerant are not included
Additional information
Chrome Compressor (Made in China), Compressor not listed (Specify Compressor needed in comments. Extra charges may apply), No Compressor and No Bracket (Specify Compressor being used in comments. Extra charges may apply), OEM Sanden 508 Compressor (Made in Singapore), OEM Sanden 709 Compressor (Made in USA), Sanden Style 508 (Made in China), Sanden Style 709 (Made in China), Serpentine Compressor And Bracket (Extra Charges on top of upcharge may apply depending on Bracket needed)
Chevrolet
Car, Fleetline, Sedan Delivery, Styleline Deluxe, Styleline Special
49 & Older Chevy In-Dash Kit Instructions
1931, 1932, 1933, 1934, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949
Related products
1964 – 1967 Mustang A/C Kit 289 302 Engine
SKU: CK-6467-2 $1,052.24 – $1,447.241967-1972 Ford Truck F-Series A/C System
SKU: CK-6772FDComplete A/C System Chrome Bumper Serpentine
SKU: CK-2101-2 $1,338.86Complete A/C & Heat System Chrome Bumper Serpentine
SKU: CK-2101-1-2 $1,454.36