1958-1975 Chevy Car Complete A/C System for all 58-75 Chevy models including: Bel Air, Biscayne, Brookwood, Camaro, Caprice, Chevelle, Delray, El Camino, Chevy II Nova, Impala, Kingswood, Laguna, Malibu, Monte Carlo, Monza, Nomad, Parkwood, Sedan Delivery, Townsman, Vega and Yeoman. This kit is designed to hide behind the dashboard, using vents in or under the dash. This kit can integrate the factory cable operated controls, or you can use the rotary knob style controls that are included. The kit will hook up to the factory defrost outlet under the dash.  Some glove box modifications may be necessary and the firewall will not require any major modifications (Firewall will need holes for the hoses).  We carry an assortment of firewall rings, and bulkheads for a clean firewall presentation. Several upgrade options are available.

The kit is complete and includes the following:

1. Evaporator kit with expansion valve and mounting hardware.
2. Cables, and controls to use the original heater control panel
3. R-134a Hose kit (See hose kits Page for contents)
4. Black o-ring drier with drier straps
5. Condenser of your choice with condenser mount kit
6. Sanden Style A/C compressor with clutch
7. Compressor mount kit (to fit your engine)
8. HI / Lo binary pressure switch
9. Directions

If you need a different size condenser please specify the size in the checkout section. The compressor will come with a double V-belt clutch unless a different setup is requested. Pulleys and a radiator fan are not included. A fan and fan shroud should be used on the radiator, or a sufficient electric fan. The setup requires a double groove water pump pulley, and a triple groove crank pulley. Please specify in checkout if you have a long or short water pump and if the alternator is on the driver or passenger side. A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover.