1967 – 1972 Chevy truck A/C system. Underdash mount A/C system. The evaporator unit will mount under the dash of the truck, and span from the passenger side to the steering column. The evaporator unit will require a small modification to the factory heater box, but it will not affect the performance of the heater system. The evaporator unit has four vents with chrome outlines, and a simple knob control.
Kit comes with everything pictured. Parts and price will vary depending on options picked and engine information. Kit Contents include the following:
1.) AC Only 15,000 BTU Evaporator with expansion valve, mounting hardware and grommets.
2.) R-134a Hose kit (See hose kits Page for contents)
3.) Black O-ring drier with drier straps
4.) 14 x 25 Condenser with condenser mount kit
5.) Sanden Style A/C compressor with clutch
6.) Compressor mount kit (to fit your Chevy engine)
7.) HI / Lo binary pressure switch
8.) Directions
Several upgrade options are available. Please Specify Year Model and Engine Information.
If you need a different size condenser please specify the size in the checkout section. The compressor will come with a double V-belt clutch unless a different setup is requested. Pulleys and a radiator fan are not included. A fan and fan shroud should be used on the radiator, or a sufficient electric fan. The setup requires a double groove water pump pulley, and a triple groove crank pulley. Please specify in checkout if you have a long or short water pump and if the alternator is on the driver or passenger side. A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. The kit does not include the refrigerant, heater hoses, or belt.
1967 – 1972 Chevy Truck Underdash A/C System
1967 – 1972 Chevy truck A/C system. Underdash mount A/C system. The evaporator unit will mount under the dash of the truck, and span from the passenger side to the steering column. The evaporator unit will require a small modification to the factory heater box, but it will not affect the performance of the heater system. The evaporator unit has four vents with chrome outlines, and a simple knob control.
Kit comes with everything pictured. Parts and price will vary depending on options picked and engine information. Kit Contents include the following:
1.) AC Only 15,000 BTU Evaporator with expansion valve, mounting hardware and grommets.
2.) R-134a Hose kit (See hose kits Page for contents)
3.) Black O-ring drier with drier straps
4.) 14 x 25 Condenser with condenser mount kit
5.) Sanden Style A/C compressor with clutch
6.) Compressor mount kit (to fit your Chevy engine)
7.) HI / Lo binary pressure switch
8.) Directions
Several upgrade options are available. Please Specify Year Model and Engine Information.
$1,052.24 – $1,422.24
1967 – 1972 Chevy truck A/C system. Underdash mount A/C system. The evaporator unit will mount under the dash of the truck, and span from the passenger side to the steering column. The evaporator unit will require a small modification to the factory heater box, but it will not affect the performance of the heater system. The evaporator unit has four vents with chrome outlines, and a simple knob control.
Kit comes with everything pictured. Parts and price will vary depending on options picked and engine information. Kit Contents include the following:
1.) AC Only 15,000 BTU Evaporator with expansion valve, mounting hardware and grommets.
2.) R-134a Hose kit (See hose kits Page for contents)
3.) Black O-ring drier with drier straps
4.) 14 x 25 Condenser with condenser mount kit
5.) Sanden Style A/C compressor with clutch
6.) Compressor mount kit (to fit your Chevy engine)
7.) HI / Lo binary pressure switch
8.) Directions
Several upgrade options are available. Please Specify Year Model and Engine Information.
If you need a different size condenser please specify the size in the checkout section. The compressor will come with a double V-belt clutch unless a different setup is requested. Pulleys and a radiator fan are not included. A fan and fan shroud should be used on the radiator, or a sufficient electric fan. The setup requires a double groove water pump pulley, and a triple groove crank pulley. Please specify in checkout if you have a long or short water pump and if the alternator is on the driver or passenger side. A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover. The kit does not include the refrigerant, heater hoses, or belt.
Additional information
Chrome Compressor (Made in China), Compressor not listed (Specify Compressor needed in comments. Extra charges may apply), No Compressor and No Bracket (Specify Compressor being used in comments. Extra charges may apply), OEM Sanden 508 (Made in Singapore), OEM Sanden 709 (Made in USA), Sanden Style 508 (Made in China), Sanden Style 709 (Made in China), Serpentine Compressor And Bracket (Extra Charges on top of upcharge may apply depending on Bracket needed)
No, Yes
Advertised Drier, Chrome Drier with Bracket
Chevrolet
Pickup
67-72 Chevy Pickup Instructions
1967-1972
Related products
FJ-40 Toyota Landcruiser Kit W/ a Small Block Chevy Engine
SKU: CK-FJSBC $994.49 – $1,294.49Pontiac Underdash A/C System
SKU: CK-3975UPO $1,113.64 – $1,168.64Ford Truck Underdash A/C System
SKU: CK-3750UFD $1,052.24 – $1,522.24Toyota Landcruiser Kit No compressor bracket (BJ Diesel engine)
SKU: CK-FJ2400 $1,150.19 – $1,275.19