Dodge work truck A/C system. Underdash R-134a mount A/C system. The evaporator unit will mount under the dash of the truck, normally in the center of the dash. The evaporator unit will not require the original heat system to be modified. The evaporator has a three speed blower fan with a temperature control. The evaporator has approximately 15000 BTU and 290 CFM. This Evaporator does not have vents for floor heat.
The kit is complete and includes the following:
UD-110 evaporator kit with expansion valve and mounting hardware, grommets
R-134a Hose kit (See hose kits Page for contents)
Black o-ring drier with drier straps
14 x 20 Condenser with condenser mount kit
Sanden Style A/C compressor with clutch
Compressor mount kit, with belt, and pulley (to fit your Dodge engine)
HI / Lo binary pressure switch
Directions
The compressor will come with a double V-belt clutch unless a different setup is requested. A fan and fan shroud should be used on the radiator, or a sufficient electric fan. This kit is an inexpensive way to add a/c to a work truck, if you wish to have an original style system this will not be the system for your truck. We do not carry any Dodge truck A/C systems for trucks newer then 1980.
**** This kit will not work on a truck that is newer than 1980. This kit will not work with a manual transmission.*****
Dodge Work Truck Underdash A/C Kit
Dodge work truck A/C system. Underdash R-134a mount A/C system. The evaporator unit will mount under the dash of the truck, normally in the center of the dash. The evaporator unit will not require the original heat system to be modified. The evaporator has a three speed blower fan with a temperature control. The evaporator has approximately 15000 BTU and 290 CFM. This Evaporator does not have vents for floor heat.
The kit is complete and includes the following:
UD-110 evaporator kit with expansion valve and mounting hardware, grommets
R-134a Hose kit (See hose kits Page for contents)
Black o-ring drier with drier straps
14 x 20 Condenser with condenser mount kit
Sanden Style A/C compressor with clutch
Compressor mount kit, with belt, and pulley (to fit your Dodge engine)
HI / Lo binary pressure switch
Directions
The compressor will come with a double V-belt clutch unless a different setup is requested. A fan and fan shroud should be used on the radiator, or a sufficient electric fan. This kit is an inexpensive way to add a/c to a work truck, if you wish to have an original style system this will not be the system for your truck. We do not carry any Dodge truck A/C systems for trucks newer then 1980.
**** This kit will not work on a truck that is newer than 1980. This kit will not work with a manual transmission.*****
$1,309.99 – $1,479.99
Additional information
Weight | 70 lbs |
---|---|
Compressor Upgrade | Advertised Compressor, Chrome Compressor, OEM Sanden 508, OEM Sanden 709 |
Drier Mounted Condenser | |
Chrome Drier Upgrade | |
Make | |
Model | |
Years Covered |
Related products
-
1964 – 1967 Mustang A/C Kit 289 302 Engine
SKU: CK-6467-2 $1,052.24 – $1,447.24 -
1949 – 1952 Ford Truck Heat Air Defrost
SKU: CK-4952FD $1,212.11 – $1,582.11 -
Ford Indash AC Heat Defrost Kit 1950 and Older
SKU: CK-3750IFD $1,512.11 – $1,817.11