Street Rod Heaters and Accessories

Street Rod Heaters

If your Classic ride is already cool and you would like to add a little heat, one of our Heaters will be a great solution! For our Customers that don't need A/C and would like to replace their existing heater. Nostalgic AC carries two different types of Street Rod heaters. One with vents built in, and another with remote vents and a defrost option. These heaters are nice and compact and fits most applications. Each heater uses the hot water from your engine to heat up the Cab of your Vehicle. All heaters and accessories are covered by our 1 year Warranty.

  1. Vacuum Reservoir Ball  

    Vacuum Reservoir Ball

    Part #5080

    Plastic vacuum canister reservoir. This canister is the solution to low vacuum on engines with large cams, and / or low vacuum output. The reservoir is designed to store vacuum while operating the vehicle. The canister will store vacuum until it is needed. When an A/C system, carburetor, or any other vacuum operated part is used the canister will have plenty "stored" to provide the function.
    The reservoir is made of injection molded plastic with a flat mount on one side, and two 3/16" vacuum outlets on the bottom. The ball measures 4-5/8" tall x 5" wide. The canister has a flat mounting point on the backside that will allow easy mounting. The mounting holes are slotted that can be used with screws or 1/4" bolts.

    Learn More
    $15.99

  2. Vacuum Actuator  

    Vacuum Actuator

    Part #77-3000
    Vacuum control actuator that will work with any aftermarket vacuum control setup. The valve is normally closed. Learn More
    $9.99

  3. Vacuum Actuator Solenoid  

    Vacuum Actuator Solenoid

    Part #77-3001
    Vacuum control solenoid actuator valve that will work with any aftermarket vacuum control setup. The solenoid valve has a two port 1/8 vacuum connection. Learn More
    $14.99

  4. Cable Operated Heater Control Valve  

    Cable Operated Heater Control Valve

    Part #77-3002

    Cable operated heater control valve to open and close the flow of water. The valve is setup to pull to open. The valve is very common on cable operated aftermarket ac systems. The valve has 5/8" heater hose ends. These valves can be used with the factory cables on the original control panels.

    Learn More
    $24.99

  5. Manual Heater Control Valve  

    Manual Heater Control Valve

    Part #77-3004
    Manual heater control valve to open and close the flow of water. Manual shut off valve (screw top). The valve can be used on any heater system with 5/8 heater hoses. Learn More
    $9.99

  6. Heater Control Valve Vacuum Operated  

    Heater Control Valve Vacuum Operated

    Part #77-3005
    Vacuum operated heater control valve to open and close the flow of water in the heater system. The valve is opened with vacuum, it is normally closed. This is the most common valve on aftermarket heat and A/C evaporator units that use vacuum operated controls. The valve uses 5/8" heater hoses, and 1/8" vacuum tube. Learn More
    $34.99

  7. Heater Control Valve Bowden Cable  

    Heater Control Valve Bowden Cable

    Part #77-3007
    4 FT. bowden cable with a pull knob. The cable is commonly used on pull to open heater control valves. The cable can also be used on our defrost Y adapter. Learn More
    $14.99

  8. Street Rod Heater with Remote Vents  

    Street Rod Heater with Remote Vents

    Part #ID-300

    Heater system with two remote vents for any application that uses water in the cooling system. This heater is designed to plumb into the original heater hoses off of the motor. The heater has a three speed blower motor that will provide air flow on a low, medium, and high speed. The blower switch included with the kit can be mounted to any flat surface. The heater has two outlets for dash vents. The unit has four 1/8" holes on each corner for mounting, it can be mounted in any orientation to a firewall, floorboard, or any other flat surface.
    The heater measures: 9-1/2" x 10-5/8" x 5". The 9-1/2" does not include the fitting hose connections.

    Learn More
    $149.99

  9. Street Rod Heater with Defrost  

    Street Rod Heater With Defrost

    Part #ID-305

    Heat and defrost system for any application that uses water in the cooling system. This heater is designed to plumb into the original heater hoses off of the motor. The heater has a three speed blower motor that will provide air flow on a low, medium, and high speed. The blower switch included with the kit can be mounted on any flat surface. The heater has two outlets for dash vents, and a single defrost outlet that blows air up to the windshield. A "Y" adapter is included with the kit to utilize both defrost diffusers under the dash, the "Y" also has a manual flap to block off air flow to the windshield. The unit has four 1/8" holes on each corner for mounting, it can be mounted in any orientation to a firewall, floorboard, or any other flat surface.
    The heater measures: 9-1/2" x 10-5/8" x 5" The 9-1/2" does not include the fitting hose connections.

    Learn More
    $199.99

  10. Universal Street Rod Heater System Black Vents  

    Universal Street Rod Heater System Black Vents

    Part #Street Rod Heater Black Vents

    New universal heater system that will fit most years makes and models of cars, trucks, vans, street rods, etc. Dimensions of the unit are 10" Wide x 5" Deep and 9 1/16" Tall.
    If you need a Heater Valve choose from the options below.

    Learn More
    $124.99