11 X 19 Superflow Condenser With Drier Mounted

This is an aluminum parallel flow condenser with an O-ring drier mounted and connected with a 5/16″ aluminum tube. The condenser has mounting holes across the top, bottom, and on each end. The condenser and drier are black in color. The drier has a sight glass, and a standard switch port. The setup will arrive assembled.

$144.36

This is an aluminum parallel flow condenser with an O-ring drier mounted and connected with a 5/16″ aluminum tube. The condenser has mounting holes across the top, bottom, and on each end. The condenser and drier are black in color. The drier has a sight glass, and a standard switch port. The setup will arrive assembled.
Core size: 10″ tall x 20″ wide x 7/8″ thick
Overall condenser size: 11″ tall x 23″ wide x 3-1/2″ thick
The condenser has two male O-ring fittings:
Top: #8 Male insert (3/4″-16)
Bottom: #6 Male insert (5/8″-18)
The condenser can be used with R-12 or R-134a refrigerants.
The condenser can be installed with the fittings exiting on the passenger or driver side. Please specify; if you do not specify it will arrive with a passenger side exit fittings.

Additional information

Weight 32 lbs
Drivers Side or Passenger Side Placement of Drier

,

Make

Model