All black rectangle underdash or indash vent. This vent is designed to mount under the dash or any flat surface; or it can be taken out of the mount bezel and used as in dash louver. The vent bezel has a mount tab on top of each side for easy mounting. If you choose to mount the louver in the dash it is designed with four mounting tabs to retain it to a flat panel. This vent accepts a 2.5″ duct hose.
The vent with bezel measures:
* 6-3/8″ across the top of the mounting bezel
* 4-3/8″ across the bottom of the mounting bezel
* 1-7/8″ tall with the mounting bezel
* 1-1/4″ thick w/o the duct hose adapter
* 2-3/8″ thick with the duct hose adapter
Vent dimensions without the bezel:
* 3-13/16″ wide (overall face)
* 1-9/16″ tall (overall face)
* 3-5/8″ wide (mounting hole)
* 1-5/16″ wide (mounting hole)
The thickness (depth) of the vent is the same with or without the mounting bezel. The tabs for mounting are a 1/4″ wide (on each side of the top) This vent is made in the USA out of injection molded plastic.