Big Block Mopar/Chrysler 383, 400, 413, 426, 440 Compressor Bracket
The bracket is designed to mount a Sanden SD508 / SD5H14 or a SD709 / SD7H15 compressor. The bracket will mount the compressor on the driver side of the engine between the distributor and the water-pump. The bracket includes the following: brackets, idler pulley, nuts, bolts, washers and spacers. The bracket will include everything needed to add a compressor to your engine. With or without power steering. If using idler in the kit, this bracket will need a 3-1/2″ deep crank pulley or our add-On Pulley (Sold Separately). Add-on Pulley can be purchased by selecting the option for the Pulley below.
This is an exclusive NACP Bracket made in the USA in Ocala, Florida.
Bracket Instructions:
$149.99
The bracket is designed to mount a Sanden SD508 / SD5H14 or a SD709 / SD7H15 compressor. The bracket will mount the compressor on the driver side of the engine between the distributor and the water-pump. The bracket includes the following: brackets, idler pulley, nuts, bolts, washers and spacers. The bracket will include everything needed to add a compressor to your engine. With or without power steering. If using idler in the kit, this bracket will need a 3-1/2″ deep crank pulley or our add-On Pulley (Sold Separately). Add-on Pulley can be purchased by selecting the option for the Pulley below.
This is an exclusive NACP Bracket made in the USA in Ocala, Florida.
Bracket Instructions:
Additional information
| Weight | 15 lbs |
|---|---|
| Make | |
| Model | |
| Instructions |
