Complete A/C kit for 1964-1967 Mustangs with a 170 – 200 CI six cylinder engine. This kit is designed to fit the early Mustangs that did not have a console that went to the bottom of the dash. This Evaporator comes with your choice of Single, Dual and Tri-Vane Vents. Specify at checkout what vent style you prefer. The evaporator unit is designed to fit under the dash without interfering with the foot space of the driver or passenger. The system will work with a six cylinder motor and it will not require any extra pulleys. The compressor mount bracket will require an alternator. The compressor mounts on the lower passenger side of the engine. The compressor will have a double groove clutch pulley. One pulley on the clutch will run on the stock pulleys on the engine. The second compressor pulley will route around the alternator, this setup eliminates any needs for more pulleys. The system uses R-134a refrigerant.

The kit includes all the major components to add air to a Mustang:

• Sanden style compressor with V-belt clutch and PAG oil
• 170-200 Ford six cylinder compressor bracket with mount hardware
• UD-190 underdash evaporator unit with expansion valve, controls, and mounting hardware.
• Standard O-ring drier with mounting strap
• 44-1418 superflow condenser with mounting hardware
• R-134a hose kit (see contents)
• High low pressure switch
• Directions

This is a complete A/C system that will include all the parts necessary to add A/C except the refrigerant to charge it. A radiator fan or a condenser fan may be needed depending on your current setup. The evaporator unit is manufactured by Nostalgic AC Parts in the USA.

All of our complete kits come with everything needed to install Air Conditioning in your vehicle except for Pulleys (sold separately). All kits will require a 3 Groove Crank Pulley (If using V-Belts). For Chevy Small Block and Big Block Engines, you will also need a 2 Groove Water Pump Pulley (If using V-Belts).

*Parts pictured above may vary.