1957 Chevrolet Complete A/C Heat System

1957 Chevrolet Indash A/C System with Heat

1955 - 1957(Later Model Model 55) Complete Chevy Truck A/C System

1955 - 1957 (Later Model 55) Complete Chevy Truck A/C System

1955 - 1956 Chevrolet A/C System with Heat

Availability: In stock
Part Number
CK-5556CHC
$1,252.24

Complete A/C heat and defrost kit for 1955-1956 Chevy Cars. This kit is designed to add heat air and defrost to a Chevy without modifying or altering the interior. The system is designed to fit on the passenger side of the firewall with the hoses exiting through the passenger side firewall. The kit is designed to use the factory defrost Y that is already in the vehicle, this will eliminate fighting with aftermarket adapters. The kit will work with the factory heater cable operated controls. The system will not interfere with the glove box, or the passenger side floor board.

The glove box will not interfere with this system, and the firewall will not require any major modifications (Firewall will need holes for the hoses).  We carry an assortment of firewall rings, and bulkheads for a clean firewall presentation.

Kit is available with come with either cable controls (Default Option) or you have the option to send us your controls to modify. Several upgrade options are available.

Complete A/C heat and defrost kit for 1955-1956 Chevy Cars. This kit is designed to add heat air and defrost to a Chevy without modifying or altering the interior. The system is designed to fit on the passenger side of the firewall with the hoses exiting through the passenger side firewall. The kit is designed to use the factory defrost Y that is already in the vehicle, this will eliminate fighting with aftermarket adapters. The kit will work with the factory heater cable operated controls. The system will not interfere with the glove box, or the passenger side floor board.

The glove box will not interfere with this system, and the firewall will not require any major modifications (Firewall will need holes for the hoses).  We carry an assortment of firewall rings, and bulkheads for a clean firewall presentation.

Kit is available with come with either cable controls (Default Option) or you have the option to send us your controls to modify. Several upgrade options are available.

The kit is complete and includes the following:

  • Evaporator kit with expansion valve and mounting hardware. 
  • Cables, and controls to use the original heater control panel
  • R-134a Hose kit (See hose kits Page for contents)
  • Black o-ring drier with drier straps
  • 16 x 20 Condenser with condenser mount kit
  • Sanden Style A/C compressor with clutch
  • Compressor mount kit (to fit your engine)
  • HI / Lo binary pressure switch
  • Directions

If you need a different size condenser please specify the size in the checkout section. The compressor will come with a double V-belt clutch unless a different setup is requested. Pulleys and a radiator fan are not included. A fan and fan shroud should be used on the radiator, or a sufficient electric fan. The setup requires a double groove water pump pulley, and a triple groove crank pulley. Please specify in checkout if you have a long or short water pump and if the alternator is on the driver or passenger side. A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover.

More Information
Years Covered 1955, 1956
Make Chevrolet
Model Bel Air, Car, Nomad, One-Fifty Series, Sedan Delivery, Two-Ten Series
Instructions 55-56 Chevy In-Dash Kit Instructions
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account