102R SBC Short Pump Bracket High Mount Passenger Side

102R SBC Short Pump Bracket High Mount Passenger Side

129R SBC Short Pump Bracket High Mount Passenger Side

129R SBC Short Pump Bracket High Mount Passenger Side

128R SBC Short Pump Bracket High Mount Passenger Side

Availability: In stock
Part Number
128R
$102.38

A very versatile street rod style bracket system. Works well with most induction systems. Will clear multiple carbs, fuel injection, etc. Bolts to the head and top water pump bolt holes. The alternator bracket will fit all 1969 and newer heads. The A.C. Compressor bracket fits all G.M aluminum heads including the fast-burn aluminum heads and may be used on 1969 thru 1986 cast iron heads by drilling and tapping one hole for the upper mounting point. Will clear up to 3 in. tall center bolt valve covers when used on 1987 and later heads. Will clear up to 3 3/4 in. tall valve covers when used on 1986 and earlier heads.

Alternator bracket available via option below. Alternator Bracket Part# is 228L. Alternator Bracket is not included by default.

A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover.

A very versatile street rod style bracket system. Works well with most induction systems. Will clear multiple carbs, fuel injection, etc. Bolts to the head and top water pump bolt holes. The alternator bracket will fit all 1969 and newer heads. The A.C. Compressor bracket fits all G.M aluminum heads including the fast-burn aluminum heads and may be used on 1969 thru 1986 cast iron heads by drilling and tapping one hole for the upper mounting point. Will clear up to 3 in. tall center bolt valve covers when used on 1987 and later heads. Will clear up to 3 3/4 in. tall valve covers when used on 1986 and earlier heads.

This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. Short water pump Small block chevy
Bracket sits on the passenger side, includes all mounting hardware
Brackets require double groove water pump, triple groove crank and single groove power steering pulleys. If no p/s then double groove water and crank pulley. The bracket is designed to mount Sanden 508 / SD5H14 and 709 / SD7H15 compressors.
Metal finish, needs to be painted
Alternator bracket available via option above. Alternator Bracket Part# is 228L. Alternator Bracket is not included by default.

A short water pump will sit up against the timing chain cover, a long water pump will have a one inch gap between the rear of the pump and the timing chain cover.

More Information
Pulley Type V-Belt
Bracket Style Street Rod
Engine Size Small Block/Short Water Pump
Compatible with Vortec Heads No
Compatible with Factory PS Bracket Yes
Instructions 128R Instructions
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account